topic Re: Problem with tool path that may be a bug in latest version in Fusion Support Forum

Problem with tool path that may be a bug in latest version

tomae — Tue, 17 Mar 2020 19:07:40 GMT

I have a part that I generated several tool paths for a week or so back that work great. I have a nearly identical part, slightly different dimensions, that I am trying to generate identical tool paths for. I am literally copying the setup and tool paths from the working part to the model. But two (of the 3) tool paths are not being generated correctly.

I would like to send the two models, I just don't want to post them in the forum. Is there someone specific I can send them to or to a general support address?

Thanks,

-Tom

Re: Problem with tool path that may be a bug in latest version

HughesTooling — Tue, 17 Mar 2020 19:33:42 GMT

What ops are failing? There was some problems with turning ops in the last update, does your original design still regenerate if you edit an op?

Mark

Re: Problem with tool path that may be a bug in latest version

tomae — Tue, 17 Mar 2020 19:55:13 GMT

@HughesTooling wrote:
What ops are failing? There was some problems with turning ops in the last update, does your original design still regenerate if you edit an op?

Mark

A 2D Adaptive and a 2D Contour both have issues. The original design has the correct toolpath. But now that you ask...if I unselect things and try to regenerate it fails in the same way as the newer one.

On the 2D Adaptive the toolpath is appearing under a curve I selected rather than above the curve (for no apparent reason) and on the 2D contour one side of the tool path appears to be truncated.

These are both in a mill-turn part.

-Tom

Re: Problem with tool path that may be a bug in latest version

HughesTooling — Tue, 17 Mar 2020 20:00:48 GMT

@seth.madore Are you able to help with this?

Mark

Re: Problem with tool path that may be a bug in latest version

seth.madore — Tue, 17 Mar 2020 20:12:43 GMT

Mark, thanks for tagging me!

@tomae email me the file if you'd like.

seth dot madore at autodesk dot com

Re: Problem with tool path that may be a bug in latest version

tomae — Wed, 18 Mar 2020 03:02:24 GMT

Thanks, I just sent the two designs.

-Tom