topic Re: Bugs in the new joint implementation in Fusion Support Forum

Bugs in the new joint implementation

jaharley — Mon, 23 Mar 2020 06:51:50 GMT

Hi,

Is anyone else seeing joint issues with the recent updates? I am on 2.0.7813 and a formerly working assembly now shows "Compute Failed" on a ball joint. Interestingly, with that ball joint in place, all the subsequent joints in the file also will not compute. Another issue I have seen is that when exporting some of that STEP file (unrelated parts to the ball joint), my assembly was scrambled, but it came out OK as an IGES.

Thanks,
Jonah

Re: Bugs in the new joint implementation

jeff_strater — Mon, 23 Mar 2020 15:01:34 GMT

@jaharley - can you share the design that is showing this behavior? Preferably a back version of it, when it was working. We can test it on the old and new builds to see if this is really a change in behavior or not. Thanks.

Re: Bugs in the new joint implementation

jaharley — Tue, 24 Mar 2020 06:01:40 GMT

Hi Jeff, I'd be happy to. Can I send it to you directly rather than posting (it has some confidential features)? If posting is the only option, I'll have to spend some time stripping it down. Thanks.

Re: Bugs in the new joint implementation

jeff_strater — Wed, 25 Mar 2020 04:31:46 GMT

certainly. Use the "Share Public Link" option from this article: How-to-share-a-Fusion-360-design , and then paste the link into a Direct Message to me on this forum. Thanks!