topic Re: Trouble with tool snapping when following Autodesk Tutorial in Fusion Support Forum

Trouble with tool snapping when following Autodesk Tutorial

Anonymous — Wed, 25 Mar 2020 00:23:50 GMT

In this tutorial: https://f360ap.autodesk.com/courses/sketching-and-parameters/lessons/lesson-1-sketch-basics

After time 1:35 the demonstration snaps to points in the Valve Body component without explicitly projecting the component. In the latest version of Fusion 360 I am unable to have my tool make the same snaps. I first have to project lines from the component using the project tool. Is this an issue with the component I am using or did a feature's functionality change?

Re: Trouble with tool snapping when following Autodesk Tutorial

davebYYPCU — Wed, 25 Mar 2020 00:32:32 GMT

Preferences has a switch for that,

Project on reference, means it will only project if you reference the article needed.

Might help....

Re: Trouble with tool snapping when following Autodesk Tutorial

Anonymous — Wed, 25 Mar 2020 01:15:39 GMT

That did it! Thank you very much