Fusion lagging, not responding

wymer_99 — Tue, 07 Apr 2020 21:35:18 GMT

I'm trying to draw features on a part using circles and intersecting lines, then when I try to clean it up by trimming the parts of the lines or circles I don't need it starts lagging and not responding then when it finally comes around it won't let me trim what I what to trim.

It seams to be worse the more complicated the drawing is.

I have an 8 core processor and 16 gigs of RAM the task manager said I was only using 16% and memory is running at 28% when the software starts freezing up.

Need help I'm spending way to much time on this part

Thanks

Re: Fusion lagging, not responding

jeff_strater — Tue, 07 Apr 2020 22:59:44 GMT

share your design here. My guess is your sketch is large, and large sketches are not recommended in Fusion. There are techniques you should use such as doing patterning, mirror, etc as solid patterns rather than sketch patterns, etc. Use lots of small sketches, not one large sketch

Also, there is usually no need to do trimming on a sketch. The features allow you to select any area in a sketch, so usually there is no need to trim.

topic Re: Fusion lagging, not responding in Fusion Support Forum

Fusion lagging, not responding

Re: Fusion lagging, not responding