Drawing Dimension Not Updating from Design

ksimolo — Sat, 18 Apr 2020 19:48:08 GMT

I have a design where I changed several dimensions. All but one update correctly to the linked drawings except the depth (it was changed from 0.745 to 0.748. Creating a new drawing still reflects 0.745. At first, I thought it was a rotation problem but extrusions show 0 angle and the old value of 0.745 should have shown differently if the object was rotated. As a check, I did a sketch top view in the design, created a vertical line with the starting point horizontal to one corner and made it 0.748 long and forced it vertical. lines between the two corners of the object and the two end points of the line are the same length and zero angle. I must be doing something wrong in the design that is causing this error, a constraint or something but I can not see it.

I shared the file in the autodesk gallery with the name "Block with Dimension that does not update in drawing".

Any help would be appreciated.

Thanks!

Ken

Re: Drawing Dimension Not Updating from Design

ksimolo — Sat, 18 Apr 2020 20:00:48 GMT

A big never mind but thanks for looking. After wasting 90 minutes and posting, it occurred to me to make a copy and delete working back through the timeline to see where the error occurred. I had two extrudes that were identical initially (no idea why twice) and the second one was not changed. Dimensioning in the drawing must be picking up the 2nd extrude while in the design, it sees the first.

Ken

topic Re: Drawing Dimension Not Updating from Design in Fusion Support Forum

Drawing Dimension Not Updating from Design

Re: Drawing Dimension Not Updating from Design