https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464557#M117031 OK that’s maybe a workaround, but it’s not a viable solution. Surely the software should do that automatically. It’s not until you measure it that the size difference becomes apparent to the designer. But in the manufacturing this could cause expensive problens<BR /> Thu, 23 Apr 2020 11:10:19 GMT Anonymous 2020-04-23T11:10:19Z https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464353#M117029 <P>When I add a thread to a rod that is not threaded completely along its length, why does the remaining unthreaded area change to a smaller Diameter and not remain as original - see pics</P><P>&nbsp;</P><P>Dick Flanakin</P> Thu, 23 Apr 2020 09:24:22 GMT https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464353#M117029 Anonymous 2020-04-23T09:24:22Z https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464504#M117030 <P>Split Face.</P> Thu, 23 Apr 2020 10:42:28 GMT https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464504#M117030 TheCADWhisperer 2020-04-23T10:42:28Z https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464557#M117031 OK that’s maybe a workaround, but it’s not a viable solution. Surely the software should do that automatically. It’s not until you measure it that the size difference becomes apparent to the designer. But in the manufacturing this could cause expensive problens<BR /> Thu, 23 Apr 2020 11:10:19 GMT https://forums.autodesk.com/t5/fusion-support-forum/added-thread-changes-the-diameter-of-unthreaded-area/m-p/9464557#M117031 Anonymous 2020-04-23T11:10:19Z