https://forums.autodesk.com/t5/fusion-support-forum/issues-with-holls-and-threads/m-p/13003364#M11526 <P>Fusion has never had the ability to create a modelled thread in a tapered hole. There have been many posts about this over the years.</P> Thu, 05 Sep 2024 18:00:10 GMT MRWakefield 2024-09-05T18:00:10Z https://forums.autodesk.com/t5/fusion-support-forum/issues-with-holls-and-threads/m-p/13002977#M11525 <P>I don't know if this is related to the most recent update but I have encountered the following issues related to holes and threads</P><P>&nbsp;</P><P>1) when using the hole function, you can select tapered threads and NPT as the thread type. &nbsp;However you no longer have an option to model the threads when creating the hole.</P><P>&nbsp;</P><P>2) when you use the insert Thread function, NPT threads are not offered as an option.</P><P>&nbsp;</P><P>Am I missing something on how to create a modeled NPT thread?</P><P>&nbsp;</P><P>Jason</P> Thu, 05 Sep 2024 15:18:11 GMT https://forums.autodesk.com/t5/fusion-support-forum/issues-with-holls-and-threads/m-p/13002977#M11525 jasonhomrighaus 2024-09-05T15:18:11Z https://forums.autodesk.com/t5/fusion-support-forum/issues-with-holls-and-threads/m-p/13003364#M11526 <P>Fusion has never had the ability to create a modelled thread in a tapered hole. There have been many posts about this over the years.</P> Thu, 05 Sep 2024 18:00:10 GMT https://forums.autodesk.com/t5/fusion-support-forum/issues-with-holls-and-threads/m-p/13003364#M11526 MRWakefield 2024-09-05T18:00:10Z