topic Re: This shape will not close. in Fusion Support Forum

This shape will not close.

Anonymous — Tue, 12 May 2020 16:18:43 GMT

I am following a tutorial and apparently this shape is meant to become orange when it is properly closed. I cannot see any gaps yet it is not! Please advise. Here is a link to the project: https://a360.co/2YWjMTd

Re: This shape will not close.

g-andresen — Tue, 12 May 2020 16:39:44 GMT

Hi,

1. orange is the color of an old UI

2. Your sketch is closed but not full defined > 2 dimensions ( 10 & 100) missing.

Screencast

günther

Re: This shape will not close.

MoshiurRashid — Tue, 12 May 2020 16:43:54 GMT

Well I've found it as completely closed sketch. 🙂 Hover over the mouse on the sketch closed region, it will highlight as closed. I can also extrude it as a solid. If it were't closed, I couldn't had do that!
Which tutorial are you following? Share the link and time in your next post.

Re: This shape will not close.

Anonymous — Tue, 12 May 2020 19:45:18 GMT

I thought this was the reason that I was getting this error. Any idea what the reason for it is of not an unclosed shape?

Re: This shape will not close.

g-andresen — Tue, 12 May 2020 20:55:19 GMT

Hi,

The reason is that you used a tutorial where an old UI still existed. The background color of the UI was orange

Günther