topic Re: Fusion reproducibly crashes when doing a specific fillet in Fusion Support Forum

Fusion reproducibly crashes when doing a specific fillet

janikmdietz — Sun, 17 May 2020 13:53:29 GMT

// See attached Screenshot

When using a fillet command of 4mm on the highlighted edges Fusion reproducibly crashes. Tried at least 6 times. The edges on the other side which theoretically should be identical but mirrored can be filleted without any issues.

I am using a 2012 MacBook Pro upgraded to 16GB RAM and a dual drive with a 500GB SSD as the main drive on macOS Catalina with Fusion 2.0.8335 - so it shouldn't be a matter of the hardware I'm using, especially as this is a moderately complex part.

Crash Reports were created and sent, I hope you have access to them when looking into this

Re: Fusion reproducibly crashes when doing a specific fillet

rishabh.bisht — Mon, 18 May 2020 21:35:33 GMT

Hi @janikmdietz

Thanks for reporting this issue.
I've confirmed that this is a bug and have logged a ticket for further investigation with our development team.
(internal reference FUS-65999)

I will keep you posted on any development on this. Sorry for the trouble!

Thanks.

Re: Fusion reproducibly crashes when doing a specific fillet

janikmdietz — Tue, 19 May 2020 10:15:54 GMT

Almost got internal reference FUS-66000!

Thanks though for the quick reply and swift action! 🙂

Re: Fusion reproducibly crashes when doing a specific fillet

janikmdietz — Thu, 21 May 2020 18:58:51 GMT

Update - I Added four more flanges/screw features and now it also crashes at fillet sizing 3mm and up.

Re: Fusion reproducibly crashes when doing a specific fillet

christoph.wech — Sat, 06 Mar 2021 17:00:59 GMT

Any updates on this? I have a similar situation where the program would freeze entirely until I terminate it after attempting to perform a fillet between a b-spline curve and a line

Re: Fusion reproducibly crashes when doing a specific fillet

janikmdietz — Mon, 08 Mar 2021 15:45:55 GMT

Not that I know of unfortunately..