https://forums.autodesk.com/t5/fusion-support-forum/view-cube-flips-when-creating-sketches-on-the-xy-plane/m-p/13008212#M11394 <P>Here's what happen when I Create Sketch based on the different planes I select:</P><P>&nbsp;</P><P>Select &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; View Cube</P><P>XZ plane &nbsp; &nbsp; &nbsp; &nbsp; Front</P><P>YZ plane &nbsp; &nbsp; &nbsp; &nbsp; Right</P><P>XY plane &nbsp; &nbsp; &nbsp; &nbsp; Top, but it's upside down</P><P>&nbsp;</P><P>I read using a Mac might be the reason but I'm not sure; I'm using a MacBook Air.&nbsp;</P><P>&nbsp;</P><P>Is there some default setting that I missed? It should be pretty straight forward to get a right side up view of the XY plane where the View Cube just says Top.</P> Mon, 09 Sep 2024 01:37:11 GMT p-2157 2024-09-09T01:37:11Z https://forums.autodesk.com/t5/fusion-support-forum/view-cube-flips-when-creating-sketches-on-the-xy-plane/m-p/13008212#M11394 <P>Here's what happen when I Create Sketch based on the different planes I select:</P><P>&nbsp;</P><P>Select &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; View Cube</P><P>XZ plane &nbsp; &nbsp; &nbsp; &nbsp; Front</P><P>YZ plane &nbsp; &nbsp; &nbsp; &nbsp; Right</P><P>XY plane &nbsp; &nbsp; &nbsp; &nbsp; Top, but it's upside down</P><P>&nbsp;</P><P>I read using a Mac might be the reason but I'm not sure; I'm using a MacBook Air.&nbsp;</P><P>&nbsp;</P><P>Is there some default setting that I missed? It should be pretty straight forward to get a right side up view of the XY plane where the View Cube just says Top.</P> Mon, 09 Sep 2024 01:37:11 GMT https://forums.autodesk.com/t5/fusion-support-forum/view-cube-flips-when-creating-sketches-on-the-xy-plane/m-p/13008212#M11394 p-2157 2024-09-09T01:37:11Z