topic Re: Feature Select in Circular Pattern selects extra faces in Fusion Support Forum

Feature Select in Circular Pattern selects extra faces

richard.ballard — Tue, 26 May 2020 04:50:49 GMT

Hi I've found a bug where I want to pattern an extrusion around, however, when I try to select the feature, it selects extra faces and thus gives a bad preview. I've attached images of creating the extrusion, selecting the extrusion and patterning to show the issue. I've also attached the exact same setup in Inventor to show what I mean.

It looks like fusion cleans up the bad faces after the patterning, but the live preview would suggest there may be an issue.

I do note, I am using the same sketch for both features yet this should still work as the features are different.

Re: Feature Select in Circular Pattern selects extra faces

g-andresen — Tue, 26 May 2020 08:43:18 GMT

Hi,

if you share your design we can take a look

günther

Re: Feature Select in Circular Pattern selects extra faces

jeff_strater — Tue, 26 May 2020 18:46:48 GMT

try a different pattern type than "Adjust" - "Identical" or "Optimized" will likely work for you.