topic Scale a face in Fusion Support Forum

Scale a face

emma.badger — Wed, 10 Jun 2020 16:39:19 GMT

Is it possible to make the blue face slightly larger, leaving the bottom the same size and the edges slanted?

Thanks.

Re: Scale a face

davebYYPCU — Wed, 10 Jun 2020 16:54:21 GMT

Did you try to do that and is not working?

Cant see your timeline,

Either, Extrude with taper angle, draft from bottom face, or Loft between two sketches spaced at the right height, may work better than scaling.

Might help.....

Re: Scale a face

g-andresen — Wed, 10 Jun 2020 17:21:21 GMT

Hi,

try this: Screencast

1. create offset plane
2. create sketch and project base profile
3. create offset contour with wall thickness for the inner profile
4. loft body for the whole body
5. loft body inside > cut from the 1st loft body

finished

günther