topic Cannot cut out spline in Fusion Support Forum

Cannot cut out spline

andreEX8QQ — Wed, 17 Jun 2020 13:19:04 GMT

Hey all,

Please look into my picture and help me how I can draw a handle for a door. The problem is that I cannot cut out the spline.

Thanks,

Andr'e

Re: Cannot cut out spline

g-andresen — Wed, 17 Jun 2020 14:25:14 GMT

Hi,

please show a picture of the real part.

günther

Re: Cannot cut out spline

andreEX8QQ — Wed, 17 Jun 2020 17:33:29 GMT

Op wo 17 jun. 2020 18:24 schreef André van Stijn :

> Hey Gubther,
>
> First off all thanks for your quick reply, in the fusion file there is a
> sketch with the picture. However enclosed you will find some pictures.
>
> The most difficult part for me will be kle small part at the bottom by the
> way.
>
> Thanks a lot,
>
> André
>

Re: Cannot cut out spline

g-andresen — Wed, 17 Jun 2020 18:25:39 GMT

Hi,

All I see is a projection of whatever
So I ask: is it something like this what you want to achieve?

günther

Re: Cannot cut out spline

andreEX8QQ — Wed, 17 Jun 2020 18:41:20 GMT

This is the original part, so I think I need to cutout the spline as I draw but I don't have much experience so I don't know.