topic Re: measure between 2 points not working, seemingly random measurements in Fusion Support Forum

measure between 2 points not working, seemingly random measurements

Anonymous — Mon, 06 Jul 2020 13:02:31 GMT

trying to measure from a hole centre to another hole centre line to get a measurement needed to design the next part but its behaving randomly and i have no idea why. thanks

Re: measure between 2 points not working, seemingly random measurements

wmhazzard — Mon, 06 Jul 2020 16:37:48 GMT

Specifically how is it randomly measuring? Are you using snap points in the measure command?

Re: measure between 2 points not working, seemingly random measurements

Anonymous — Mon, 06 Jul 2020 17:04:26 GMT

dont think i had snap points on, but dont know why it did this? linked.

Re: measure between 2 points not working, seemingly random measurements

Phil.E — Tue, 14 Jul 2020 15:10:12 GMT

@Anonymous I didn't find anything attached. Are you still seeing this issue? An image or video might help. Glad to take a look.

Re: measure between 2 points not working, seemingly random measurements

Anonymous — Tue, 14 Jul 2020 18:12:48 GMT

sometimes in models with lots of parts using the measure function will cause random measurements that have nothing to do with 1 or 2 points

https://autode.sk/3j1RbU7

Re: measure between 2 points not working, seemingly random measurements

Anonymous — Tue, 14 Jul 2020 18:17:42 GMT

the model; https://a360.co/3gXllWB

Re: measure between 2 points not working, seemingly random measurements

Phil.E — Tue, 14 Jul 2020 20:10:57 GMT

It's not clear to me what is going on, but thanks for sharing the model and video.

While we're figuring this out, you can achieve the measurement by adding a construction axis to the cylinder. This should not be necessary, but it happens to help in this case.

Re: measure between 2 points not working, seemingly random measurements

Anonymous — Tue, 14 Jul 2020 20:20:28 GMT

Thanks, its supposed to be a fold flat ramp, the geometry should make it rise and fall in a linear controlled way until the uprights are at 180 degrees. Havent put any locking detail in yet. Keep not being able to move it up or down at all despite adding motion links and im reasonably sure of the maths.