topic Re: Save As Mesh - behaviour changed in Fusion Support Forum

Save As Mesh - behaviour changed

george.riggall — Thu, 19 Sep 2024 09:01:56 GMT

Hi all,

I'm running Fusion 2.0.20256 arm64

on macOS 14.4.1 (23E224) on Mac13,2

I was explaining to a colleague yesterday how it was so easy to send a design to Bambu Studio for printing.

My workflow was:

Right click on part > Save As Mesh > Ok

My last used setting of Preparation Type was remembered and the part would be loaded straight into Bambu Studio.

Typically... after my Fusion application updated yesterday the behaviour has changed so that now my last used Preparation Type is not remembered and default to Export each time.

Also following the update the part only loads into Bambu Studio if Bambu Studio is not already running. To load a part directly into Bambu Studio I have to first quit Bambu Studio. No good for multiple parts..

So now if I want to send multiple parts to Bambu Studio I have to export each part as a file and them load them into Bambu Studio manually.

Not the end of the world but it's certainly frustrating. I suspect that this new behaviour is not intended.

Re: Save As Mesh - behaviour changed

ianC9ZF9 — Thu, 19 Sep 2024 10:33:09 GMT

Just spotted this myself using Orcaslicer. As George says, this changed in the new version installed today.

Fusion 2.0.20256 arm64 [Native]
Active Plan: Personal
macOS 13.6.1 (22G313) on Mac14,13

Re: Save As Mesh - behaviour changed

trialbraen1992 — Thu, 19 Sep 2024 10:48:46 GMT

Also faced with this issue yesterday.

Link to my opened issue with attached video:
https://forums.autodesk.com/t5/fusion-support/fusion-update-issue-save-as-mesh-to-print-utility-bambustudio/td-p/13028499

Re: Save As Mesh - behaviour changed

TrippyLighting — Thu, 19 Sep 2024 11:08:18 GMT

I have no way of reproducing this, but I am going to tag @Phil.E

Re: Save As Mesh - behaviour changed

lukas.fuhrmann — Thu, 19 Sep 2024 14:55:04 GMT

Thanks for reporting this. We are aware of the issue and are working on a fix that should go into the next available Fusion update. We did a lot of refactoring to the 3d print/save as mesh command and while there are a lot of improvements, this issue has sliped through unfortunately. @george.riggall you could work around the "save as mesh" issue by using the 3d print command in the Utilities Tab under Make -> 3d print. This is essentially the same command but it will remember your latest setting until we have a fix for "save as mesh" .

Re: Save As Mesh - behaviour changed

george.riggall — Thu, 19 Sep 2024 15:10:06 GMT

Thanks @lukas.fuhrmann for looking into this.

The workaround doesn't improve the second issue:

Also following the update the part only loads into Bambu Studio if Bambu Studio is not already running. To load a part directly into Bambu Studio I have to first quit Bambu Studio. No good for multiple parts..

So now if I want to send multiple parts to Bambu Studio I have to export each part as a file and them load them into Bambu Studio manually.

Thanks,

George

Re: Save As Mesh - behaviour changed

lukas.fuhrmann — Thu, 19 Sep 2024 15:37:01 GMT

Yes, I am aware that the workaround will only help with the save as mesh issue, but not the issue around the parts not transferring if the slicer is already running. We will fix that as soon as we can.

Sorry for the inconvenience,

Lukas

Re: Save As Mesh - behaviour changed

jonZW34K — Sat, 21 Sep 2024 13:05:21 GMT

Thanks for raising this issue @george.riggall and for looking into it @lukas.fuhrmann . Thought I was going crazy for the past couple of projects, until I realised it was a software change. My workflow linked to Ultimaker Cura and it was really easy to set up before. Hoping that will be the same once resolved. Looking forward to this being fixed as using this workflow is like second nature for me.

Betreff: Save As Mesh - behaviour changed

lukas.fuhrmann — Wed, 02 Oct 2024 08:27:09 GMT

thanks for your patience and sorry for the inconvenience. The latest Fusion update, that was rolled out last night contains the fix, so make sure to update and you should be able to send to your 3d print utilities again. Tipp for BambuSlicer. Under Settings you can activate a setting to "only open one instance of Bambu Slicer". If this is checked, your models will be added to the current build plate. If you uncheck it, then a new instance of the slicer is loaded and the part is added there.

Re: Save As Mesh - behaviour changed

george.riggall — Wed, 02 Oct 2024 09:15:47 GMT

The Save as Mesh > Print Utility does work agin. Thanks for fixing.

My preference for preparation type is not remembered though and still defaults to Export each time.

Re: Save As Mesh - behaviour changed

trialbraen1992 — Wed, 02 Oct 2024 09:41:17 GMT

I confirm, the main problem is solved.
And I support — it would be nice if the last selected export type will be saved.

Re: Save As Mesh - behaviour changed

fusion360EZD6B — Mon, 07 Oct 2024 20:27:58 GMT

@trialbraen1992 wrote:
And I support — it would be nice if the last selected export type will be saved.

Yes, that would restore the behaviour as it was a couple of weeks ago. While iterating on a design, making tweaks to suit the slicer, it's quite irritating to have to go through the select-your-slicer-app process every time.

Re: Save As Mesh - behaviour changed

spawnreaper — Wed, 09 Oct 2024 07:10:27 GMT

same problem here. every time I want to send it to the printer I have to change settings. It does not save my last used settings (like save mesh to bambu lab)

Betreff: Save As Mesh - behaviour changed

surik_torosyan — Thu, 24 Oct 2024 01:49:48 GMT

Any update on if the default to export is being worked on?

Betreff: Save As Mesh - behaviour changed

lukas.fuhrmann — Fri, 25 Oct 2024 11:34:13 GMT

the default will be remembered again with the next Fusion update that goes out. Because of the other issue discussed in this thread, we currently don't have an ETA on when this will be rolled out.

Re: Save As Mesh - behaviour changed

george.riggall — Tue, 29 Oct 2024 14:35:54 GMT

It looks like this is fixed now in the latest update. My workflow is back to being super slick 😄

Thanks!

Re: Save As Mesh - behaviour changed

dewaine50 — Wed, 04 Dec 2024 00:54:29 GMT

Latest update contains a ton of issues. Like if you try to export with custom parameters, the OK button is grayed it. It's randomly setting the refinement values to 0 for no reason.

Basically the moment you touch Custom export settings, it ruins any memory of previously held export settings. It used to not be like this just a few weeks ago.

Re: Save As Mesh - behaviour changed

dewaine50 — Wed, 04 Dec 2024 00:58:08 GMT

Like seriously how is it this bad. You have to toggle it from low to high back and fourth for like 10 extra click steps just to get to back to normal export. And even then it doesn't remember the settings and sets it all to 0 again.

It was bad enough that my default camera controls were suddenly changed. Whoever pushed this update did not test it.

Re: Save As Mesh - behaviour changed

dewaine50 — Wed, 18 Mar 2026 08:21:17 GMT

Any update on this? It's been obnoxious, constantly having to jostle the settings each and every time.