topic Re: Exporting issues with Prusa Slicer in Fusion Support Forum

Exporting issues with Prusa Slicer

karuthTGNHA — Thu, 19 Sep 2024 20:54:01 GMT

When I want to export some mesh from Fusion360 to the prusa slicer application, it correctly opens prusa slicer and make the part slicable. However when PrusaSlicer is already open and I want to export more parts to the print surface to be sliced, it stops working. I.e. I can export one part but not several parts directly to prusa slicer, and when the application is already open, well nothing works. Of course I can also export and then import, but compared to the previously possible shortcut that's really inconvienient.

Re: Exporting issues with Prusa Slicer

flamingfireball361 — Fri, 20 Sep 2024 07:03:48 GMT

having the same problem

Re: Exporting issues with Prusa Slicer

gniewko248 — Fri, 20 Sep 2024 08:54:15 GMT

Same here. It happened during last update. Any ETA for a fix?

Re: Exporting issues with Prusa Slicer

seth.madore — Fri, 20 Sep 2024 13:41:52 GMT

Thanks for reporting this issue. We do have a ticket open to work on this: FUS-171507 and hope to get a fix out as soon as is feasible

I'm assuming that you are all on a Mac OS? Or are there PC users who are also running into this?

Re: Exporting issues with Prusa Slicer

avarbeckley — Fri, 20 Sep 2024 19:11:28 GMT

I have the same issue and I am on Mac OS. Issue happened in Sonoma 14, and continued to happen when I updated to Mac OS 15 Sequoia.

Re: Exporting issues with Prusa Slicer

thorsten5YH47 — Sat, 21 Sep 2024 02:58:44 GMT

I´m also having te same issue since the workflow for "3dPrint" has changed:

On my side you can set everything and even click "OK", but the data does not arrive at Prusa Slicer.

Im runninbg MAC OS Ventura.

Greets, Thorsten

Re: Exporting issues with Prusa Slicer

bjfwaldron — Sun, 22 Sep 2024 01:06:43 GMT

I have the same issue. Mac OS Sonoma, M2. Occurred when I updated to the most recent Fusion 360 version.

My issue is the same as above - If Prusa Slicer is not open the model is transferred OK. If Prusa slicer is open, no model transfer appears to occur.

Re: Exporting issues with Prusa Slicer

thespencerowen — Sun, 22 Sep 2024 03:43:55 GMT

I'm also on OSX Sequoia and this started happening with both BambuSlicer and Prusa Slicer. I've also tried choosing a 'custom' export and manually choosing the BambuSlicer location with no luck.

I've tried installing BambuSlicer from both .dmg file and from home-brew with the same result.

The only work around I've found is to export to disk then manually import into the slicer.

Re: Exporting issues with Prusa Slicer

rgovostes — Sun, 22 Sep 2024 04:20:40 GMT

A small request to the team while fixing this issue: The "Save as Mesh" panel always defaults to "Export", which takes extra clicks to send to the external slicer program. This is a regression from the previous release where I could go from Fusion -> slicer in two clicks. Can you please have the panel remember the last "preparation type" selection?

Edit: already discussed here

Re: Exporting issues with Prusa Slicer

spadrille — Sun, 22 Sep 2024 10:12:27 GMT

I agree with this request. Please let us choose the default Save as mesh mode.

Re: Exporting issues with Prusa Slicer

vzr83hxymj — Sun, 22 Sep 2024 17:41:30 GMT

I have the same issue on latest Fusion on MacOS Sonoma and Bambu Studio. Started after last update of Fusion.

Re: Exporting issues with Prusa Slicer

normanDC2ER — Mon, 23 Sep 2024 01:18:09 GMT

I also have this problem with the latest update. I am on MacOS Sonoma 14.6.1 on Apple M1 chip.

The workflow to "make" completely changed and I cannot export more than one body to PrusaSlicer. This is a big problem now.

Re: Exporting issues with Prusa Slicer

Bernhard_Fehr — Mon, 23 Sep 2024 09:32:09 GMT

Same problem for me with Prusa Slicr after update. I'm using a Mac Studio with M2 and Sequoia (15.0). The workflow is broken and the workaround with exporting to disk is very inconvenient.

Re: Exporting issues with Prusa Slicer

patrick6CQRH — Mon, 23 Sep 2024 14:43:51 GMT

Mac OS15 and Bambu Studio, same issue since the last update. Good to know I'm not alone in this struggle! Hopefully, we'll get a swift solution soon—before I completely lose my mind! 🙂

Re: Exporting issues with Prusa Slicer

g-andresen — Mon, 23 Sep 2024 14:50:21 GMT

Hi,

@patrick6CQRH ; @Bernhard_Fehr @normanDC2ER , @vzr83hxymj

Did you realise that there is a ticket (#4).

This means that the problem is being worked on.

günther

Re: Exporting issues with Prusa Slicer

Bernhard_Fehr — Mon, 23 Sep 2024 17:07:57 GMT

Following the discussion it was not clear for me that the developers are really working on the ticket. But this is good news to hear. Thanks a lot for the information. 😀

Bernhard

Re: Exporting issues with Prusa Slicer

detroitstylz — Mon, 23 Sep 2024 22:19:06 GMT

Is there a place to track the status of FUS-171507 ? Apologizes I couldn't find a bug report section of the site anywhere.

Re: Exporting issues with Prusa Slicer

rossBD2BB — Tue, 24 Sep 2024 10:21:11 GMT

Up until the last update I could simply choose 3D print from the file menu and the file would be opened in Bambu Studio ready to slice. No I have to export an STL and use that to open in Bambu Studio. I assume this is the same issue and look forward to the bug fix

Re: Exporting issues with Prusa Slicer

APLATHROP — Wed, 25 Sep 2024 18:53:05 GMT

Same issue here with the latest updated. SUPER annoying. Glad it's being worked on.

Also, if you choose PrusaSlicer for the application is there a directory so you can choose the correct application?

Re: Exporting issues with Prusa Slicer

pierre_vialME72S — Thu, 26 Sep 2024 06:56:24 GMT

Hi, I'm having the same issue. Thanks for solving it!