topic Re: Request: Please add PLA material and Volume measurement in Fusion Support Forum

Request: Please add PLA material and Volume measurement

OceanHydroAU — Sat, 22 Aug 2020 13:23:42 GMT

If Autodesk is reading this - please add these 2 simple requests to your work queue:

Add PLA to the materials (where you've already got ABS, etc) because it is the most common one FFF material. And - please call it "PLA (Polylactic Acid)", to stay consistent with your existing naming (e.g. ABS, PVC, etc) and because that's what everyone calls it.

Add Volume (of, at least, a body) into the inspect tool. I know (if it's the only body) you can get that info from the component menu, but it belongs in the inspect dropdown (and, since me and plenty of other forum users have googled this, that's where we all expect it to live).

Re: Request: Please add PLA material and Volume measurement

Haad_Ali — Wed, 09 Dec 2020 04:52:21 GMT

@OceanHydroAU why not raise that issue on the feedback hub. I have also in need of that material.

Re: Request: Please add PLA material and Volume measurement

OceanHydroAU — Thu, 10 Dec 2020 12:43:01 GMT

Are you able to post into that feedback hub ?

It's been about a year since I last tried, but, I never managed to get that to work. From memory, it's closed/archived or otherwise not something normal users can access?

Re: Request: Please add PLA material and Volume measurement

Haad_Ali — Fri, 11 Dec 2020 05:44:09 GMT

@OceanHydroAU I tried to post that request to the feedback hub.