Simulation Static stress not working on MAC MACOS

coyotewaits3 — Thu, 27 Aug 2020 14:26:50 GMT

I have not been able to get any static stress analysis to work in the local mode on my Mac. I have been able to solve problems on the cloud that will not run locally.

The analysis starts but ends with a status failed with the following errors.

Error: Solver Error

Error: An error occurred while solving the model.

Here is the LOG FILE

******************************

Face Angle min: 4.69, max : 168
Dihedral Angle min: 4.97, max : 166
Worst shape ratio : 20.5 on element 735
Worst aspect ratio : 8.31 on element 408, shortest edge: 0.00635, longest : 0.0528
Lowest collapse ratio : 0.0757 on element 735
Worst Jacobian ratio : 2.69 on element 3678
Base mesh: 8767 nodes, 4355 elements
Solver mesh: 8767 nodes, 4355 elements
Job has finished with errors. Receiving results.
Error: Solver Error
Error: An error occurred while solving the model.

UntitleStatic Stress Cantilevered Pipe v1: Simulation Model 1 - Study 1 - Static Stress
_____ 2020-08-27 07:51:55 _____
Error: Solver Error
Error: An error occurred while solving the model.

UntitleStatic Stress Cantilevered Pipe v1: Simulation Model 1 - Study 1 - Static Stress
_____ 2020-08-27 07:51:56 _____
4355 T : 100.0% of elements (100.0% of volume)
Face Angle min: 4.69, max : 168
Dihedral Angle min: 4.97, max : 166
Worst shape ratio : 20.5 on element 735
Worst aspect ratio : 8.31 on element 408, shortest edge: 0.00635, longest : 0.0528
Lowest collapse ratio : 0.0757 on element 735
Worst Jacobian ratio : 2.69 on element 3678
Base mesh: 8767 nodes, 4355 elements
Solver mesh: 8767 nodes, 4355 elements
Job has finished with errors. Receiving results.
Error: Solver Error
Error: An error occurred while solving the model.

********************************************

Screen Shot of setup

This is a 4 inch x 48 inch pipe with one end constrained and an axial load on the other end. The Simulation interface seems to be working and you can see the solve check mark is green for ready to solve.

When I first opened the static stress simulation I got a message that F-360 was installing the Nastran solver or something to that effect.

My computer is a MacBook Pro (15-inch, 2018)

Processor 2.2 Ghz Intel Core i7

Memory 16 GB 2400 Mhz DDR4

Re: Simulation Static stress not working on MAC MACOS

TheCADWhisperer — Thu, 27 Aug 2020 14:58:03 GMT

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Simulation Static stress not working on MAC MACOS

coyotewaits3 — Fri, 28 Aug 2020 13:07:03 GMT

Here is f3d file. This is one of several designs that did not workI also downloaded an example problem (Lifting Fixture) none of which worked locally.

Thanks for the help.

Jack

Re: Simulation Static stress not working on MAC MACOS

coyotewaits3 — Sun, 30 Aug 2020 20:13:31 GMT

I added the .f3d file but maybe I did not do it right and/ or you have not seen it.

topic Re: Simulation Static stress not working on MAC MACOS in Fusion Support Forum

Simulation Static stress not working on MAC MACOS

Re: Simulation Static stress not working on MAC MACOS

Re: Simulation Static stress not working on MAC MACOS

Re: Simulation Static stress not working on MAC MACOS