topic Re: Mirrored Chamfer feature doesn't match original in Fusion Support Forum

Mirrored Chamfer feature doesn't match original

suretech1 — Fri, 04 Sep 2020 13:38:47 GMT

Hello, I did a lot of searching but could not find an error. Most results were mirrored features not working at all. Mine Chamfer features mirror, except that distance/distance does not match the original(different dimensions). I have tried Optimized, adjusted and identical. with no difference. I have tried using face mode and selecting faces. I have also tried feature mode and selected features from the timeline.

I can apply the chamfer individually to each side as a workaround but I feel this is a simple enough calculation that the software should be able to handle it.

Thanks for the help.

Re: Mirrored Chamfer feature doesn't match original

TheCADWhisperer — Fri, 04 Sep 2020 14:14:06 GMT

I would have used Revolve rather than Loft.

Interesting result though - looks like a bug to me, but I will have to dig deeper.

What difference are you observing if you change the Mirror output to Optimized?

Re: Mirrored Chamfer feature doesn't match original

suretech1 — Fri, 04 Sep 2020 14:14:58 GMT

EDIT: I chose "Optimize" and that fixed the issue. I swear I chose optimize. I apologize for that. Thanks again!

Revolve entered my thought briefly at the beginning. This would only be useful for the main profile correct? I would still need to add in my tabs after Revolve feature? Is this why my mirrored chamfer is not coming out properly? I will experiment in the meantime.

Thank you for the quick reply.

Joe

Re: Mirrored Chamfer feature doesn't match original

g-andresen — Fri, 04 Sep 2020 14:20:31 GMT

Hi,

select all features included

I prefer "Faces"

günther