topic Re: Mesh brush size usually too big in Fusion Support Forum

Mesh brush size usually too big

hoegge — Sat, 05 Sep 2020 12:44:05 GMT

The mesh brush size you can select in the mesh environment is often too big. It does not even help to scale up your mesh 10 or 100 times / then the brush size just grows. The size of the brush should really be relative to viewport / window size instead of model so you can make a finer brush. In this image I show the smallest brush possible on this STL:

Re: Mesh brush size usually too big

g-andresen — Sat, 05 Sep 2020 14:40:06 GMT

Hi,

this should be done in Meshmixer

günther

Re: Mesh brush size usually too big

hoegge — Sat, 05 Sep 2020 16:30:15 GMT

Not a very useful or constructive reply. If it should, it was not a feature
in AutoDesk.

Re: Mesh brush size usually too big

jayarvinsettle — Sat, 21 Nov 2020 16:27:33 GMT

Check this out. The smallest brush size is for some reason proportional to the entire drawing. If you separate a part of it you get a smaller brush. I don't know how to glue the separated piece back in yet.

https://www.youtube.com/watch?v=ajwqeHS5l6Y

Re: Mesh brush size usually too big

Anonymous — Fri, 22 Jan 2021 19:50:28 GMT

I confirmed this - The smallest mesh palette brush size on my model was enormous. I then split a larger mesh into smaller mesh bodies using face groups. Now the brush size can get as small as an individual polygon of my model. Thanks for finding this!