https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9744802#M103883 <P>Hey Community,</P><P>&nbsp; &nbsp;I am new here and with using Fusion 360. I have been trying all day to use create form to model a piece of furniture molding. Needless to say I had to come here to get help. I have a screen shot attached that shows what I get when I have a plane of faces and try to extrude a 'T' shape in the middle of them. The top of the 'T' all the faces extrude but the base of the 'T' going in another direction doesn't work. I came up with using Create Form from a tutorial on YouTube by Mrs. Tanner Reid which is in this Community. But I couldn't get that lesson to work for me either. I am using the free hobbyist/personnel edition of Fusion 360.&nbsp;</P> Sun, 13 Sep 2020 22:51:42 GMT lavoy.allison 2020-09-13T22:51:42Z https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9744802#M103883 <P>Hey Community,</P><P>&nbsp; &nbsp;I am new here and with using Fusion 360. I have been trying all day to use create form to model a piece of furniture molding. Needless to say I had to come here to get help. I have a screen shot attached that shows what I get when I have a plane of faces and try to extrude a 'T' shape in the middle of them. The top of the 'T' all the faces extrude but the base of the 'T' going in another direction doesn't work. I came up with using Create Form from a tutorial on YouTube by Mrs. Tanner Reid which is in this Community. But I couldn't get that lesson to work for me either. I am using the free hobbyist/personnel edition of Fusion 360.&nbsp;</P> Sun, 13 Sep 2020 22:51:42 GMT https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9744802#M103883 lavoy.allison 2020-09-13T22:51:42Z https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9746275#M103884 <P>Hold down the ALT key (Windows) or Option key (macOS) when extruding. Otherwise, you'll just drag existing faces around.</P> Mon, 14 Sep 2020 17:39:26 GMT https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9746275#M103884 TrippyLighting 2020-09-14T17:39:26Z https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9746359#M103885 Thank you! I will try that now. Have a blessed week!<BR /> Mon, 14 Sep 2020 18:17:41 GMT https://forums.autodesk.com/t5/fusion-support-forum/can-t-get-all-faces-to-extrude-in-create-form-mode-what-is/m-p/9746359#M103885 lavoy.allison 2020-09-14T18:17:41Z