topic Re: Wrapping "Icicle pattern" around flat cylinder in Fusion Support Forum

Wrapping "Icicle pattern" around flat cylinder

rwhopper — Thu, 26 Sep 2024 05:12:02 GMT

Hello. I have been trying to figure out how to do this for a while today and even with a couple people's help, didn't get very far.

I have a flat cylinder that I want to wrap Icicles around. Here I have an example of what I am trying to achieve:

Rather than this "dripping" effect, I want to add Icicles instead.

What I've tried:

I created the 165mm x 1mm circle. I then created an offset plane to the outside of the "plate". I added an SVG of an icicle shape I found, and tried everything from projecting, embossing, creating circle pattern, pattern along path. Nothing seems to work.

Any shape that looks like icicles rather than drips will work.

Any help would be greatly appreciated! thank you.

Re: Wrapping "Icicle pattern" around flat cylinder

davebYYPCU — Thu, 26 Sep 2024 05:34:15 GMT

Would likely make a single icicle in Tsplines, for an organic look.

Copy or pattern those, and scale a few to different sizes.

Might help...

Betreff: Wrapping "Icicle pattern" around flat cylinder

g-andresen — Thu, 26 Sep 2024 08:06:15 GMT

Hi,

please share the SVG for reply

günther

Re: Wrapping "Icicle pattern" around flat cylinder

Warmingup1953 — Thu, 26 Sep 2024 10:08:55 GMT

So you want icicles not popsicles?

Re: Wrapping "Icicle pattern" around flat cylinder

Warmingup1953 — Thu, 26 Sep 2024 10:25:11 GMT

Like this I mean but without the arithmetic error!

Re: Wrapping "Icicle pattern" around flat cylinder

rwhopper — Thu, 26 Sep 2024 14:40:40 GMT

yes something just like this (though connected all the way around)

Re: Wrapping "Icicle pattern" around flat cylinder

Warmingup1953 — Thu, 26 Sep 2024 17:10:12 GMT

Sorry I thought I had attached my WIP file for you to have a play with

Re: Wrapping "Icicle pattern" around flat cylinder

rwhopper — Thu, 26 Sep 2024 18:33:33 GMT

Would you mind attaching it so I can look and see what you did? Thank you.

Re: Wrapping "Icicle pattern" around flat cylinder

Warmingup1953 — Thu, 26 Sep 2024 19:06:02 GMT

Ahhh I did attach but it seems there must be a Website issue. ill try again and here is link just in case

https://a360.co/47Jxl9Y

Re: Wrapping "Icicle pattern" around flat cylinder

rwhopper — Thu, 26 Sep 2024 21:40:25 GMT

hm Okay so I see you used a canvas instead. Did you just use that PNG from above on the canvas? And then how do you turn the canvas into a sketch? I usually used an SVG instead since that is automatically converted as a sketch. thanks!

Re: Wrapping "Icicle pattern" around flat cylinder

rwhopper — Fri, 27 Sep 2024 02:47:24 GMT

OOOH I think I know what I was doing wrong. Duh. When you choose the profile to emboss to, I was choosing the profile of the icicles, rather than the "negative" around it. Thanks!