https://forums.autodesk.com/t5/fusion-support-forum/post-processing-issue/m-p/9750697#M103331 <P>I have a UMC 500 SS and a VF3 SS with a TRT 160 trunion on it. Both of these machines are next gen. controls. My issue is that I am having is I copied the post because there are some changes in the settings for each individual machine but it seems to be which ever post was used last it wants to default back to those settings even when choosing the other post. Almost seems like something in the background is not allowing these posts to be treated differently.&nbsp;&nbsp;</P> Wed, 16 Sep 2020 16:15:11 GMT jeremy 2020-09-16T16:15:11Z https://forums.autodesk.com/t5/fusion-support-forum/post-processing-issue/m-p/9750697#M103331 <P>I have a UMC 500 SS and a VF3 SS with a TRT 160 trunion on it. Both of these machines are next gen. controls. My issue is that I am having is I copied the post because there are some changes in the settings for each individual machine but it seems to be which ever post was used last it wants to default back to those settings even when choosing the other post. Almost seems like something in the background is not allowing these posts to be treated differently.&nbsp;&nbsp;</P> Wed, 16 Sep 2020 16:15:11 GMT https://forums.autodesk.com/t5/fusion-support-forum/post-processing-issue/m-p/9750697#M103331 jeremy 2020-09-16T16:15:11Z