topic Re: Some bodies in design do not highlight when selected... in Fusion Support Forum

Some bodies in design do not highlight when selected...

eric_gunnerson — Thu, 17 Sep 2020 23:35:33 GMT

I have a simple design with just a few cylinders and blocks. All bodies, no components, nothing weird.

Two of my bodies do not highlight in the model when they are selected - no blue selection. I can click on them in the browser and they select - I can perform operations on them - but they do not highlight. All the others highlight.

I did a split on one of them, and the old body does not highlight, but the new one does.

Re: Some bodies in design do not highlight when selected...

jhackney1972 — Thu, 17 Sep 2020 23:37:18 GMT

Can you record a Screencast to show others this behavior and also share your model?

Re: Some bodies in design do not highlight when selected...

damionrushton — Tue, 17 Nov 2020 22:00:14 GMT

I'm having the same problem.

Before splitting, the component is completely selectable.

Whereas the body isn't?

after splitting: the bottom isn't highlighted.

but the top is:

I also had problems renaming the bottom until I hid the "top", box selected the "bottom" and then renamed it???

prior to that, renaming would revert back to "body 1".

I can extrude the bottom but not move it as though it has been grounded, but there is no grounded option.

Also if I make the "top" <selctable/unselectable> I get the red marker next to the "top" body:

Whereas the "bottom" body just turns grey when unselectable:

Re: Some bodies in design do not highlight when selected...

jeff_strater — Tue, 17 Nov 2020 23:42:49 GMT

that design seems to work OK for me. See attached video. Maybe try closing down Fusion and re-starting it?

Re: Some bodies in design do not highlight when selected...

damionrushton — Tue, 17 Nov 2020 23:50:58 GMT

Why didn't I think of that 🤔

Thank you for the quick response.