topic Re: Fusion freezing when trying to Insert McMaster-Carr Component in Fusion Support Forum

Fusion freezing when trying to Insert McMaster-Carr Component

rich — Sun, 29 Sep 2024 03:27:28 GMT

Fusion freezing/unresponsive after pressing "Download" button when inserting a McMaster-Carr Component.

Log file indicates a successful download of the .STEP file followed by only some SLM_heartbeat(s).

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Sun, 29 Sep 2024 01:08:06 GMT

@rich Took a very quick look at the logs, can you confirm if you are running multiple Fusion instances?

1. Logout of Fusion
2. Close Fusion
3. In your task manager make sure that Fusion.exe is not running
4. Restart your machine
5. Now Start and login to Fusion

See if the same problem repeats?

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Sun, 29 Sep 2024 02:18:36 GMT

Completed all steps.

The same problem persists.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Sun, 29 Sep 2024 03:00:21 GMT

@rich Can you please run the below and generate another set of logs please?

1. Close Fusion
2. Go to Add/remove programs - Select Fusion - Modify

3. This will launch the Fusion service utility

4. First run the Reset Fusion
5. Now launch Fusion
6. Go directly and run the McMaster workflow
7. Now go into Help - support and diagnostics - Service utility
8. Collect the new logs and attach the files please

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Sun, 29 Sep 2024 03:28:14 GMT

Done.

Unfortunately, this forum site is prohibiting me from attaching any more files. 😞

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Sun, 29 Sep 2024 03:37:06 GMT

@rich You can email it directly to me at raj.kumar.ilanchelian@autodesk.com

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Sun, 29 Sep 2024 18:11:35 GMT

I also noticed that the Network Diag. Tester fails the "collaborator" test.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

jhackney1972 — Sun, 29 Sep 2024 21:40:11 GMT

The same Network Diagnostic Test fails on my application also. It does not seem to affect me inserting McMaster-Carr components into my models.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Mon, 30 Sep 2024 07:32:13 GMT

@rich As @jhackney1972 called out the collaboration should not impact Mcmaster download.

The logs shows the following towards the end:

20240928T201742 I .5164 The McMaster part will be downloaded to ***\AppData\Local\Temp\Neutron\9540K717_Unthreaded Bumper (1).STEP
20240928T201742 I .5164 The McMaster part is being downloaded to ***\AppData\Local\Temp\Neutron\9540K717_Unthreaded Bumper (1).STEP
20240928T201742 I .5164 The McMaster part has been downloaded to ***\AppData\Local\Temp\Neutron\9540K717_Unthreaded Bumper (1).STEP

Can you check to see if this file that you used from McMaster is indeed inside the temp folder? If you do see it then the download works but then inserting it into the design is not working.

Clear this temp folder and then try the Insert workflow again.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

jpk5z — Mon, 30 Sep 2024 21:33:19 GMT

This is the exact same behavior when trying to Save As Mesh (STL) and opening STEP files as I reported here (I believe the McMaster inserts as a STEP file):

https://forums.autodesk.com/t5/fusion-support/save-as-mesh-lock-up-crash/td-p/13038969

I believe these are all related

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Tue, 01 Oct 2024 23:54:25 GMT

@rich @We have deployed a new update 2.0.20460. Can you please update to this version and try again? We do believe this issue will be addressed in this version.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Wed, 02 Oct 2024 03:07:17 GMT

Sadly, the update does not fix the problem. 😞

Re: Fusion freezing when trying to Insert McMaster-Carr Component

jlarsonLP454 — Wed, 02 Oct 2024 16:58:13 GMT

I noticed a month or two ago that McMaster inserts freeze for ~30 seconds now where before they happened almost instantly - not sure what changed and mine always do eventually work, there's just an annoying delay and I often end up clicking the "download" button twice in case I missed it the first time. Not sure this is related to the OP's issue, but thought I'd mention it

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Thu, 03 Oct 2024 21:51:59 GMT

@rich Did you try the following?

Can you check to see if this file that you used from McMaster is indeed inside the temp folder? If you do see it then the download works but then inserting it into the design is not working.

Clear this temp folder and then try the Insert workflow again.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Fri, 04 Oct 2024 00:37:54 GMT

Same result.

Another possible data point... whenever I try to Move a model, the "Move To" window gets stuck "Receiving data..."

And Renaming a model never completes with the data panel constantly refreshing. The old name remains, even when viewed on the Web.

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Fri, 04 Oct 2024 01:58:38 GMT

@rich Can you quickly run the "Insert component" and see if you are able to insert one without any issues? It seems like McMaster is downloading the file but then is not able to Insert it into Fusion.

Regarding your other data panel workflows like a rename for example, if you do the rename on Fusion team (the web), I assume it changes the name successfully?

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Fri, 04 Oct 2024 12:28:05 GMT

Yes, the file is successfully downloaded to the Temp folder (with/without a pre-existing file in the folder), and then the freeze.

I've experienced no issues with the Web interface. Interestingly, a Web "rename" will send an update message to the PC, but that doesn't result in successfully updating the data panel on the PC:

{"message":[{"message":{"eventType":"LineagePropertiesChanged","lineageUrn":"urn:adsk.wipprod:dm.lineage:-2T1H9TQT6aAsDWdoClPGQ","operationType":"Rename","projectDmid":"a360prod:group:425944191","branch":"master","branchUrn":"","parentFolderUrn":"urn:adsk.wipprod:fs.folder:co.PMdcyVEWSamwV9zcpPIAWg","name":"19 inch trayy","modifiedBy":"AAVVLZN5TAFL","modifiedTime":"2024-10-04T12:16:22+0000","eventId":"22682000-4bd7-46df-804b-a002db3f691b","sourceServiceTrackingId":"a360_prod_ip-10-8-98-34.ec2.internal_11d_3d619823d92_10d-Clone-1.WIP-d7425e30-bb52-4699-aa8f-6a6f57f0f65c"}}],"channelStatus":["available"]}
20241004T051623 I .17816 Collaboration Notification: processed eventType[Rename] lineageUrn[urn:adsk.wipprod:dm.lineage:-2T1H9TQT6aAsDWdoClPGQ] eventTime[-1] userId[]

Re: Fusion freezing when trying to Insert McMaster-Carr Component

RajkumarIlanchelian — Fri, 04 Oct 2024 13:07:09 GMT

@rich Lets try a clean start and see where it lands us.

Close Fusion

Uninstall Fusion, then:
Go to C:\Users\user\AppData\Local\ DELETE folder Autodesk\
Delete your Fusion launcher shortcut
Download the installer again
Now install

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Sun, 06 Oct 2024 00:45:25 GMT

Same result even after a clean re-install.

This version is fundamentally broken. It even struggles to populate the data panel after opening a project. Repeat presses of the Refresh button are ineffective:

20241005T165452 I .19720 Workflow start: HTTPRequest 1-6701d1cc-4ea74aeb55334c70ae6b1e9a
20241005T165453 I 21056 GET 200 https://notifications.prd.fusionapi.autodesk.com/v1/channel/a360prod%3Agroup%3A88007718 - workflow:PushNotificationManager attempt:0 requestId:f360_PushNotificationManager__1-6701d1cb-eee40fdb0b114ca6ba940605 dt=0.58
20241005T165453 I 21056 PushNotification got channel:b.fusion-not.hV3+qmuSHBx9TusCskaLJEeuNJc=
20241005T165453 I 21056 PushNotification starting channelName:a360prod:group:88007718 subscriberType:groupSubscription ChannelId:b.fusion-not.hV3+qmuSHBx9TusCskaLJEeuNJc=
20241005T165525 I 17072 PUT 200 https://f360sc.prd.fusionapi.autodesk.com/api/v1/sessions/23811389 - workflow:SLM_heartbeat attempt:0 requestId:f360_SLM_heartbeat__1-6701d1ec-813fd8b59c4c4057a74eb2f0 dt=0.24
20241005T165526 I 2620 MDS: In fireWorkEvents
20241005T165531 I .19720 Dashboard: invoking get folder content commands, fromCache: false
20241005T165532 I .19720 Dashboard: invoking get folder content commands, fromCache: false

Re: Fusion freezing when trying to Insert McMaster-Carr Component

rich — Fri, 11 Oct 2024 00:11:35 GMT

The latest update (20476) does NOT fix this bug, nor any of the other bugs I've posted to over the past couple of weeks. 😞