topic Re: Probing/Inspection Questions in Fusion Support Forum

Probing/Inspection Questions

Anonymous — Fri, 25 Sep 2020 13:14:59 GMT

Not sure if this is the right spot for this, but could someone point me in the direction of some instructional videos, on the advanced probing cycles?

We just got a new UMC-500SS, and we want to take full advantage of its capabilities, and probing parts for in process parts, as well as the slick work offset updating via probing and that information is input into Fusion how?

I saw a video of someone doing it on Powermill I believe. Not sure how similar it is.

Thanks in advance.

Re: Probing/Inspection Questions

Richard.stubley — Fri, 25 Sep 2020 13:34:54 GMT

Hi @Anonymous,

We have a whole host of Inspection functionality you can do.

This is a quick video I made showing the Probe WCS Functions
https://www.youtube.com/watch?v=vZnPwe3ZqwE&t=20s&ab_channel=AutodeskFusion360

This is a video I made for setting it up something called surface inspection on a HAAS next gen controller, this is a manufacturing extension function.
https://www.youtube.com/watch?v=d9VnOJoQbvg&t=130s&ab_channel=AutodeskFusion360

Also don't forget about Manual Inspection that allows you to use calipers micrometers ect to complement inspection on your machine.
https://www.youtube.com/watch?v=1uhETSR-ALY&t=425s&ab_channel=AutodeskFusion360

Feel free to give me a shout if you have any more questions.

Re: Probing/Inspection Questions

Anonymous — Fri, 25 Sep 2020 13:55:12 GMT

Thank you for the quick response.

The main video of interest was the second one. Setting up the Haas controller and the settings for the Inspection Cycle.

Is it the same process for probing 5 axis geometry? Can I instead pick random parts on a swarfed surface?

Re: Probing/Inspection Questions

Richard.stubley — Fri, 25 Sep 2020 13:57:44 GMT

Yes exactly that you just put the points anywhere you can reach with the probe. You click on the point and drag it around.

Its a bit long but I did a 2hr webinar at the start of the year.
https://www.youtube.com/watch?v=el0nUMaSjS8&t=4s&ab_channel=AutodeskFusion360

Re: Probing/Inspection Questions

Anonymous — Fri, 25 Sep 2020 14:06:21 GMT

Thats the video I watched! Thank you very much!