https://forums.autodesk.com/t5/fusion-support-forum/breaking-link-to-derived-sketch-does-not-make-the-sketch/m-p/9790595#M101431 <P>This is more general, but the two attached files will serve to demonstrate. Open "Linker" and Insert Derive "Linkee", importing only Sketch1.&nbsp;</P><P>&nbsp;</P><P>Sketch1 in "Linker" is uneditable, as usual for a derived sketch. But right-click on the sketch in the browser and choose Break Link. Should this not sever the derivation relationship and allow the sketch to be edited?</P> Thu, 08 Oct 2020 06:07:55 GMT GRSnyder 2020-10-08T06:07:55Z https://forums.autodesk.com/t5/fusion-support-forum/breaking-link-to-derived-sketch-does-not-make-the-sketch/m-p/9790595#M101431 <P>This is more general, but the two attached files will serve to demonstrate. Open "Linker" and Insert Derive "Linkee", importing only Sketch1.&nbsp;</P><P>&nbsp;</P><P>Sketch1 in "Linker" is uneditable, as usual for a derived sketch. But right-click on the sketch in the browser and choose Break Link. Should this not sever the derivation relationship and allow the sketch to be edited?</P> Thu, 08 Oct 2020 06:07:55 GMT https://forums.autodesk.com/t5/fusion-support-forum/breaking-link-to-derived-sketch-does-not-make-the-sketch/m-p/9790595#M101431 GRSnyder 2020-10-08T06:07:55Z