topic Re: Trim removes constraints??? in Fusion Support Forum

Trim removes constraints???

MCanname — Tue, 20 Oct 2020 17:04:22 GMT

I know this has been posted before but I have not seen a resolution. When trimming a sketch element that has been offset, mirrored, patterned, etc... sketch constraints disappear. I've seen responses saying you don't need to trim the sketches, you can just extrude certain sections. That's great unless you are trying to extrude a surface where it needs to be all connected. Also why are projected entities not trimmable? also very problematic. Please fix this.

Re: Trim removes constraints???

g-andresen — Tue, 20 Oct 2020 17:32:46 GMT

Hi,

if you are interested in a solution please share your design.

File > export > save as f3d locally > attach it to the next post.

günther

Re: Trim removes constraints???

MCanname — Mon, 26 Oct 2020 14:07:33 GMT

Example attached. Sketch 2 has a projected ellipse with a 3mm offset. Trim any section of the offset ellipse and the dimension disappears and offset relation disappears. If you are trying to create a continuous line to extrude as a surface with an offset relation it is not possible. Also why cant you trim or edit the projected geometry?

Re: Trim removes constraints???

g-andresen — Mon, 26 Oct 2020 14:43:50 GMT

Hi,

@MCanname wrote:
Also why cant you trim or edit the projected geometry?

1. break link of your projection

2. create project with link option unchecked

günther

Re: Trim removes constraints???

MCanname — Mon, 26 Oct 2020 15:48:59 GMT

When you break the link, the geometry is no longer defined. I'm looking to keep the existing relation but modify only a portion of the sketch

Re: Trim removes constraints???

g-andresen — Mon, 26 Oct 2020 15:52:39 GMT

Hi,

I would not know how to fully define a broken ellipse.

Günther

Re: Trim removes constraints???

MCanname — Mon, 26 Oct 2020 17:07:50 GMT

for example, in Solidworks, when I convert (project) the edge of the ellipse it becomes editable but stays constrained to the edge. The black is the projected edge. I trimmed it and now if I drag the blue line, the ellipse always stays on the edge. This way if I go back and edit the original ellipse it will update properly.

Re: Trim removes constraints???

davebYYPCU — Mon, 26 Oct 2020 19:45:32 GMT

Replace the dimension, does not work for you?