topic Re: Od roughing profile failed to generate profile in Fusion Manufacture Forum

Od roughing profile failed to generate profile

evanALSJ8 — Sat, 31 Aug 2024 03:03:20 GMT

Hi all,

I can't seem to get the OD roughing on this part to generate. It's a process that I do all the time but this one has got me stumped. I've redrawn the whole part again and still the same problem.

Any help would me much appreciated.

Re: Od roughing profile failed to generate profile

a.laasW8M6T — Sat, 31 Aug 2024 03:46:56 GMT

It generates immediately for me

Have you tried restarting Fusion/your PC

One of the errors is :

Error: Failed to write Job File.

It's possible a restart will help.

If not the you can try running the repair utility

Go to Add/remove programs(assuming windows) and click modify

Then click repair fusion.

Re: Od roughing profile failed to generate profile

evanALSJ8 — Sat, 31 Aug 2024 09:33:42 GMT

Hi, thanks for the advice,

I actually ended up reinstalling Fusion but no luck.

However, when i flip the z axis in the setup it works fine from the opposite end. Still can't work out why it won't work on the counterbored end though on my system.

Re: Od roughing profile failed to generate profile

seth.madore — Sat, 31 Aug 2024 17:30:38 GMT

Hmm. I'm also seeing the toolpath generate properly, both with and without the new Spun Profile enabled. Can you check to see which one you're using? It's in Preferences > Optional Features:

Re: Od roughing profile failed to generate profile

evanALSJ8 — Sat, 31 Aug 2024 22:30:20 GMT

Hi,

It was enabled in preferences. But when I disable it, it generates fine but only allows the front fillet to be machined.

When I create another simple turning process in a new model it works fine. It just seems to be this model I'm having trouble with.

See attached file

Re: Od roughing profile failed to generate profile

evanALSJ8 — Sat, 31 Aug 2024 22:51:47 GMT

Hi Guys,

Sorry for the hassle. For whatever reason I removed the roughing profile are started again and it works fine.

Thanks again for your help