topic Re: New Update in Fusion Manufacture Forum

New Update

ifuASTJY — Tue, 10 Mar 2020 06:01:31 GMT

New Fusion update generates wrong toolpaths.

The project was fine yesterday before the update.

Thanks

Re: New Update

ifuASTJY — Tue, 10 Mar 2020 06:08:07 GMT

Was there an update in the Turning module?

Thanks

Re: New Update

kechao.wu — Tue, 10 Mar 2020 08:02:47 GMT

Hi Iulius Furtun,

Could you please attach the file for us to investigate?

Thanks,

Kechao Wu

Re: New Update

ifuASTJY — Tue, 10 Mar 2020 08:42:35 GMT

Ok, I see that when I change from the default STOCK ID setting in the radii tab to model ID it will generate the correct path.

We normally leave it on STOCK ID when we do OD operations.

attached the file with two setups good and bad :).

Thanks

Re: New Update

alexander.lewisHF698 — Tue, 10 Mar 2020 10:38:36 GMT

Just adding to this post, as my turning toolpath issue seems to have occurred since the new update also.

Basically the turning template toolpath I was using for external roughing/finishing since the update now continues through the job to the centre as per first screenshot.

It seems to be related to the Offset (3.1mm) that I added previously to the Back under the Geometry tab, when I removed this offset and added a 3.1mm Tangential Extension instead it seemed to correct itself.

This isn't a major issue, I can amend my templates and any Bushes previously using the offset instead of Tangential Extension, but why was it working just fine before and now it isn't? Will this be reverted?

I've attached a Bush I'm working on but I've tested with several other bush drawings and even created a new drawing and the offset still creates a incorrect toolpath.

Thanks for any help with this.

Post UpdatePre Update

Re: New Update

seth.madore — Tue, 10 Mar 2020 20:16:07 GMT

So sorry for this issue! We have logged it internally as CAM-20795. There are a couple workarounds; A) deliberately selecting diameters and being more specific in your selections, or B) it appears that the old turning toolpath is free from this issue, if you want to turn that Feature Flag back on in Preferences.

Re: New Update

alexander.lewisHF698 — Wed, 11 Mar 2020 08:01:50 GMT

Thank you Seth

Re: New Update

akash.kamoolkar — Thu, 26 Mar 2020 00:13:45 GMT

Hey guys @alexander.lewisHF698 @ifuASTJY

Just to update you, this issue has been fixed in the latest Fusion update that was released a few days ago.

Regards,

Akash Kamoolkar