topic 2D Contour not following geometry properly in Fusion Manufacture Forum https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490454#M87879 <P>In the image below you can see the toolpath(with cutter comp on at the control) follows the geometry like it should until the radius get smaller. The tool is .25 and the radius is .26 so there really shouldnt be a problem there. obviously not the best scenario, but it should cut this toolpath right? at first i thought it was a setting i had set. so i did a 2d contour from scratch, added my tool and it gave the same results! Please help!</P><P>&nbsp;</P><P>file is given below!<span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="Screenshot (15).png" style="width: 999px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/764819i86057B71C141248B/image-size/large?v=v2&amp;px=999" role="button" title="Screenshot (15).png" alt="Screenshot (15).png" /></span></P> Mon, 04 May 2020 16:10:31 GMT CuttingEdgeManufacturing 2020-05-04T16:10:31Z 2D Contour not following geometry properly https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490454#M87879 <P>In the image below you can see the toolpath(with cutter comp on at the control) follows the geometry like it should until the radius get smaller. The tool is .25 and the radius is .26 so there really shouldnt be a problem there. obviously not the best scenario, but it should cut this toolpath right? at first i thought it was a setting i had set. so i did a 2d contour from scratch, added my tool and it gave the same results! Please help!</P><P>&nbsp;</P><P>file is given below!<span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="Screenshot (15).png" style="width: 999px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/764819i86057B71C141248B/image-size/large?v=v2&amp;px=999" role="button" title="Screenshot (15).png" alt="Screenshot (15).png" /></span></P> Mon, 04 May 2020 16:10:31 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490454#M87879 CuttingEdgeManufacturing 2020-05-04T16:10:31Z Re: 2D Contour not following geometry properly https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490468#M87880 <P>Compensation Radius Allowance on your Passes Tab. Set it to zero:</P> <P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="2020-05-04_12h14_18.png" style="width: 999px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/764821i897505A69C0B2323/image-size/large?v=v2&amp;px=999" role="button" title="2020-05-04_12h14_18.png" alt="2020-05-04_12h14_18.png" /></span></P> <P> </P> Mon, 04 May 2020 16:15:12 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490468#M87880 seth.madore 2020-05-04T16:15:12Z Re: 2D Contour not following geometry properly https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490477#M87881 <P>Thanks!</P><P>&nbsp;</P><P>i even looked over that setting and didnt think it would make a difference so i kept looking!</P> Mon, 04 May 2020 16:17:32 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/2d-contour-not-following-geometry-properly/m-p/9490477#M87881 CuttingEdgeManufacturing 2020-05-04T16:17:32Z