https://forums.autodesk.com/t5/fusion-manufacture-forum/fusion-360-not-making-holes-in-5-axis-as-per-drawing-in-osai/m-p/9516105#M87309 <P>dear,i m trying to use osai post processor for my&nbsp; 5 axis machine which has osai controller.i have modiefied the post as per my machine.</P><P>i had made a simple program to make two holes on the top of surface and two at opposite side perpendicular to the surface.</P><P>the top surface holes are perfect but the side ones are drilled in air ,above the work piece.</P><P>i have attached the pp and program,any one can please help to sort out.</P><P>thanks in advance</P> Thu, 14 May 2020 13:50:59 GMT Anonymous 2020-05-14T13:50:59Z https://forums.autodesk.com/t5/fusion-manufacture-forum/fusion-360-not-making-holes-in-5-axis-as-per-drawing-in-osai/m-p/9516105#M87309 <P>dear,i m trying to use osai post processor for my&nbsp; 5 axis machine which has osai controller.i have modiefied the post as per my machine.</P><P>i had made a simple program to make two holes on the top of surface and two at opposite side perpendicular to the surface.</P><P>the top surface holes are perfect but the side ones are drilled in air ,above the work piece.</P><P>i have attached the pp and program,any one can please help to sort out.</P><P>thanks in advance</P> Thu, 14 May 2020 13:50:59 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/fusion-360-not-making-holes-in-5-axis-as-per-drawing-in-osai/m-p/9516105#M87309 Anonymous 2020-05-14T13:50:59Z