topic Re: 2d Contour not selecting in Fusion Manufacture Forum

2d Contour not selecting

Anonymous — Wed, 12 Aug 2020 08:41:25 GMT

Hi Team,

I try to select a 2d contour but it will not select it. I have other contours I can select within the same design but there is one I can not select and I don't know why. I have a video attached that shows that I can select other designs but the Munchie I can not select the whole lot. Please any suggestions.

Re: 2d Contour not selecting

meletis.stathis — Wed, 12 Aug 2020 09:15:54 GMT

Hi @Anonymous,

It might be a problematic open contour that is produced from the extrusion of that particular font that generates this issue. Could you please post the file so we can take a look at it?

Thanks,

Meletis

Re: 2d Contour not selecting

Anonymous — Wed, 12 Aug 2020 10:05:31 GMT

@Anonymous I have attached the file. I do that all the time and never hat any problems with that. I also try to enter the svg file again and do the same thing but still not working. The svg file is attached as well.

Thank you for your help

Re: 2d Contour not selecting

meletis.stathis — Wed, 12 Aug 2020 13:01:21 GMT

Thanks for the files. I took a quick look and I could reproduce the problem that you've seen. I could not find anything distinctly wrong with the SVG or the extrusion.
Hence, I've opened ticket CAM-23998 for further investigation.

Re: 2d Contour not selecting

seth.madore — Wed, 12 Aug 2020 13:56:22 GMT

Sometimes the selection presents too many options. That typically solves as an odd closed section, but this time it decides it wants a single segment. That bit is curious...

Re: 2d Contour not selecting

Anonymous — Thu, 13 Aug 2020 00:14:23 GMT

I have created a different svg with the same writing and font and it worked perfectly. Have a look at the video. Even if the problem is solved it would be interesting why it don't work with the first svg file.