topic Re: Toolpath edit panel dissappeared in Fusion Manufacture Forum

Toolpath edit panel dissappeared

afrith — Wed, 06 Jan 2021 13:49:51 GMT

I went to edit a tool path and the usual panel came up which was ok. Unfortunately as I moved this panel upwards towards the toolbar at the top it dissappeared and I cannot seem to get it back meaning I can no longer edit the tool paths. Restarting Fusion did not help so hopefully this is an easy fix.

Thank you

Re: Toolpath edit panel dissappeared

seth.madore — Wed, 06 Jan 2021 16:45:35 GMT

Well that's not good...

I wasn't able to make my menu disappear by moving it up off the screen, but I certainly was by moving it down. However, a Fusion restart cured that and brought it back into view, but that's not working for you?

Re: Toolpath edit panel dissappeared

afrith — Wed, 06 Jan 2021 17:16:18 GMT

No a restart did not work. I'm going to open it up on another laptop and see if that works.

Re: Toolpath edit panel dissappeared

seth.madore — Wed, 06 Jan 2021 17:40:26 GMT

I'd be curious to see if an uninstall and reinstall would do it. It's relatively quick and painless, just make sure to backup any local libraries you might have.

Re: Toolpath edit panel dissappeared

afrith — Wed, 06 Jan 2021 18:17:22 GMT

I was about to do the uninstall when upon opening Fusion on the 3rd try the panel was visible again. Quite strange but at least it's back so I can finish my project.

Thank you