topic Re: Post for Doosan lynx 2600y in Fusion Manufacture Forum

Post for Doosan lynx 2600y

Anonymous — Wed, 26 May 2021 11:38:31 GMT

We are buying a doosan lynx 2600y millturn machine next week, It has the OI-TF control. Does anyone know i fthe current doosan post for the oi control will work with this machine?

If not, how do we get a pot made for the new machine?

Re: Post for Doosan lynx 2600y

boopathi.sivakumar — Wed, 26 May 2021 11:44:09 GMT

Hi @Anonymous

We have a Doosan Mill turn post in our library

doosan_mill-turn_fanuc You can use that post while post processing you can choose the machine type as Lynx with Y axis as mentioned below

Re: Post for Doosan lynx 2600y

seth.madore — Wed, 26 May 2021 11:44:56 GMT

Beat me by 5 seconds!

I'm using that post (with my own mods) for my own Lynx 2100 LSYB

Re: Post for Doosan lynx 2600y

Anonymous — Wed, 26 May 2021 11:51:35 GMT

does your machine have the OI-TF control, Im just worried the new control wont match the OI control

Re: Post for Doosan lynx 2600y

seth.madore — Wed, 26 May 2021 12:07:34 GMT

It's the Oi control, but not the TF (new touch screen, right?)
It's going to be the same G code though, just the odd M code that might need to be adjusted. Those post edits are easy peasy for most people to do.

Re: Post for Doosan lynx 2600y

Anonymous — Wed, 26 May 2021 12:11:02 GMT

Awesome thank you!

Re: Post for Doosan lynx 2600y

connor_dibjick — Fri, 11 Aug 2023 21:28:01 GMT

Hey,

I´m buying also an LYNX2100 LSYB.

Does the Post Processor works with this machine good (also with subspindle) and how do you change settings in post processor?

Lovely Regards from Germany,

Connor

Re: Post for Doosan lynx 2600y

seth.madore — Mon, 14 Aug 2023 18:41:23 GMT

As long as it's also Fanuc based, you should be all set with this post.

Re: Post for Doosan lynx 2600y

connor_dibjick — Tue, 15 Aug 2023 23:09:37 GMT

Thank you for reply. Yes it is the new Fanuc IO Control.

Re: Post for Doosan lynx 2600y

Ceciln47 — Thu, 07 Mar 2024 13:10:05 GMT

Is there a post for DN solution Lynx 2600sy with touch screen that post a G76 cycle? I have checked use cycle when setting tool path, and turned off simple thread cycle in the post configuration.

Re: Post for Doosan lynx 2600y

seth.madore — Thu, 07 Mar 2024 13:51:16 GMT

@Ceciln47 wrote:

Is there a post for DN solution Lynx 2600sy with touch screen that post a G76 cycle? I have checked use cycle when setting tool path, and turned off simple thread cycle in the post configuration.

Using the library post, ticking the "Use Cycle" option in the toolpath and then disabling the "simple thread cycle" in the post processor (as shown below)

Will yield this for code:

X60. Y0.
Z12.7
G76 P001000 Q200 R0
G76 X38. Z-25. P1000 Q200 F2.54
G80