topic Re: 2D Bore Pitch/Angle Dual Display enhancement in Fusion Manufacture Forum

2D Bore Pitch/Angle Dual Display enhancement

Jon_Bancroft — Sat, 24 Jul 2021 11:54:39 GMT

I think this would be a nice feature to have in the 2D Bore operation.

Since we gained the option to switch between controlling 2D Bore using Pitch or using Ramp Angle I think it would be nice for the dialog window to display the resulting pitch/angle when you are driving the toolpath via the opposite.

In other words, when I tell the tool to use a 2 degree ramp angle I would like to know what the resulting pitch is.

I suppose there's no real technical benefit from this, but every time I choose ramp angle or pitch I find myself asking "I wonder what the other calculates as"

Re: 2D Bore Pitch/Angle Dual Display enhancement

seth.madore — Sun, 25 Jul 2021 10:11:22 GMT

Yeah, that does sound like a bit of useful information to have. I'll open a task today to investigate that possibility!

Re: 2D Bore Pitch/Angle Dual Display enhancement

Jon_Bancroft — Sun, 25 Jul 2021 18:16:25 GMT

Thank you Seth!

Re: 2D Bore Pitch/Angle Dual Display enhancement

seth.madore — Wed, 28 Jul 2021 13:37:45 GMT

I've opened up CAM-31053 to investigate this improvement