topic Re: Parallel toolpath malfunctioning in Fusion Manufacture Forum

Parallel toolpath malfunctioning

Anonymous — Wed, 11 Aug 2021 11:31:53 GMT

Hi please assist me quickly

Im using a 3d parallel to cut this ribs but the cutter is cutting on nto the model opn the simulation.this does not look right.

Re: Parallel program malfuntioning

daniel_lyall — Wed, 11 Aug 2021 11:31:09 GMT

You need to post the model To attach a file Go to File -> Export and save as a .F3D Archive File and attach it to your next post, if you can not post the file you can PM it to me or say in your next post you can not post the file and one of the Guys that do NDA work will help.

Re: Parallel toolpath malfunctioning

Anonymous — Wed, 11 Aug 2021 11:49:24 GMT

Hi!

I have attached the file below.thanks

Re: Parallel toolpath malfunctioning

johnswetz1982 — Wed, 11 Aug 2021 12:08:14 GMT

There are no toolpaths or setups in this file.

Re: Parallel toolpath malfunctioning

Anonymous — Wed, 11 Aug 2021 12:11:12 GMT

Hi!

I have attached cad with setups

Re: Parallel toolpath malfunctioning

DarthBane55 — Wed, 11 Aug 2021 13:29:38 GMT

What we see is the pic below. There is no CAM toolpaths in there.

Re: Parallel toolpath malfunctioning

Anonymous — Wed, 11 Aug 2021 13:59:25 GMT

How do i save in a way that you will see this setups,maybe send me your mail adress so that i can invite you in a folder in fusion.

Re: Parallel toolpath malfunctioning

DarthBane55 — Wed, 11 Aug 2021 16:22:56 GMT

Usually it works, did you export when you were in manufacturing mode? If not, try that. Then re-upload it in your own account to make sure it worked, and if it did put it back here.

Sorry I don't have time for a live sharing session, plus I don't want to take over this thread, I prefer that you succeed in exporting the CAM data, because maybe I won't be of any help, so others need to have access to it too.

Re: Parallel toolpath malfunctioning

seth.madore — Mon, 16 Aug 2021 12:49:19 GMT

@Anonymous to export the Fusion file with the CAM stuff in it:
1) Open the file in Fusion, making sure that it's the most current version, and also being the one that contains all the toolpath data.

2) Go to the File button on the top left, click it.

3) Select the "Export" option, which is the 5th option from the bottom.

4) Save the file as an .f3d or .f3z, depending on if it's an assembly file.

5) Return to thread and attach the file in the Quick Reply section at the bottom of this thread (don't use the Reply button that appears in each forum reply)