Fanuc Parts Catcher Post Processor

erikhardy339 — Fri, 13 May 2022 00:48:05 GMT

Hello,

I'm having an issue with the fanuc turning post to disengage the parts catcher. I defined the parts catcher engage(M10) and disengage (M11) variables within the code just was the link shows. The issue I am having is during the disengagement , the post is writing a M10 command instead of M11.

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Part-catcher-not-defined-messaging-in-NC-output-from-Fusion-360-MFG.html

N15 T1111
N16 G54
N17 M8
N18 G99
N19 G97 S1746 M3
N20 M10 (PART CATCHER ON)
N21 G0 X2.1874 Z0.2968
N22 G50 S3000
N23 G96 S1000 M3
N24 G0 Z-1.7933
N25 G1 X0.9957 F0.004
N26 X1.0437
N27 X0.7557
N28 X0.8037
N29 X0.5157
N30 X0.5637
N31 X0.2757
N32 X0.3237
N33 X0.2362
N34 X0.0357 F0.001
N35 X0.0837 F0.004
N36 X0.024 F0.001
N37 X2.1874 F0.004
N38 G0 Z0.2968
N39 G97 S1746 M3
N40 M10 (PART CATCHER ON)

Re: Fanuc Parts Catcher Post Processor

j.mitch97 — Fri, 13 May 2022 16:50:13 GMT

Hi @erikhardy339,

It looks like I've managed to sort this one out, please do be carful when testing this out! I'm not familiar with turning and there codes.

please do let me know if this works.

all the best,

Joe

Re: Fanuc Parts Catcher Post Processor

erikhardy339 — Fri, 13 May 2022 23:42:32 GMT

Hi Joe,
Yep you nailed it, really appreciate it. Have a great day.
Erik

topic Re: Fanuc Parts Catcher Post Processor in Fusion Manufacture Forum

Fanuc Parts Catcher Post Processor

Re: Fanuc Parts Catcher Post Processor

Re: Fanuc Parts Catcher Post Processor