topic Re: Suddenly unable to post gcode files in Fusion Manufacture Forum

Suddenly unable to post gcode files

6stringsplus2WSJR — Mon, 06 Jun 2022 19:04:30 GMT

Suspect this is related to the recent Fusion update. Tried multiple gcode files from multiple renderings.

NC editor generates the following-

Error: Failed to open output file 'G:\Folder\SR37 Bass\Neck\FB Down\rrr.nc' (system error 19).

Code page changed to '1252 (ANSI - Latin I)'

Start time: Monday, June 6, 2022 6:28:04 PM

Code page changed to '20127 (US-ASCII)'

Re: Suddenly unable to post gcode files

Marek_Skotak — Mon, 06 Jun 2022 19:32:22 GMT

Hi,

please share your Fusion project and postprocessor which you use.

Re: Suddenly unable to post gcode files

6stringsplus2WSJR — Mon, 06 Jun 2022 19:38:00 GMT

Post processor- Carbide3D(GRBL)

The file attached is just an example, they all generate the same error.

Re: Suddenly unable to post gcode files

Marek_Skotak — Mon, 06 Jun 2022 19:56:40 GMT

Strange there is all ok. Did you make some changes in a postprocessor?

Re: Suddenly unable to post gcode files

Marek_Skotak — Mon, 06 Jun 2022 19:57:28 GMT

or problem with a write you drive? Try save this code to a desktop (for example).

Re: Suddenly unable to post gcode files

6stringsplus2WSJR — Mon, 06 Jun 2022 20:08:08 GMT

Oh Wow!

Forrest for the trees moment..!?!

FIXED

TY !

I use an SD card to move gcode files from my Fusion laptop to my machine laptop. For the past 5 years if there's an issue with the card, usually the tab accidentally moved, it will tell me specifically UNABLE TO SAVE TO...

Re: Suddenly unable to post gcode files

Marek_Skotak — Mon, 06 Jun 2022 20:10:26 GMT

Sometimes happened 🙂 . You can accept my answer as solution.