topic Re: Haas TL1 Turning Post in Fusion Manufacture Forum

Haas TL1 Turning Post

cunion — Tue, 05 Jul 2022 20:42:42 GMT

Is the "HAAS Turning'' post processor from the Fusion 360 post library the correct post for the HAAS TL 1. I don't see a specific option for the TL 1. Thanks!

Re: Haas TL1 Turning Post

KrupalVala — Wed, 06 Jul 2022 04:23:52 GMT

HI @cunion ,

We have generic HAAS Turning post processor.

Please Change the post-property "Use tool changer" if your CNC does not have an automatic tool changer.

Use Turret 0 for Positional Turret, Turret 101 for QCTP on X- Post, Turret 102 for QCTP on X+ Post, Turret 103 for Gang Tooling on X- Post, Turret 104 for Gang Tooling on X+ Tool Post.

Thanks,

Re: Haas TL1 Turning Post

cunion — Wed, 06 Jul 2022 12:47:39 GMT

Thanks. I will try it out!

Re: Haas TL1 Turning Post

John_Wright — Thu, 07 Jul 2022 10:53:15 GMT

Please feel free to try the attached post. I modified the standard HAAS post to work with my TRL1 which seems to accept the G-code fine. I offer no guarantees though, and please check any G-code safely before running it.