topic Re: I’m getting a unexpected word error in G code in Fusion Manufacture Forum

I’m getting a unexpected word error in G code

thedoncutta — Sun, 13 Nov 2022 15:02:14 GMT

Getting an unexpected word error in g code in planet cnc on export

Re: I’m getting a unexpected word error in G code

seth.madore — Sun, 13 Nov 2022 15:20:19 GMT

More info is going to be needed. Do you have a screenshot, nc file, F3D file perhaps? Are you getting this error at the machine, or when posting the code in Fusion?

Re: I’m getting a unexpected word error in G code

thedoncutta — Sun, 13 Nov 2022 15:28:52 GMT

At the machine I will post a screenshot shortly after church

Re: I’m getting a unexpected word error in G code

thedoncutta — Sun, 13 Nov 2022 15:50:42 GMT

I’m getting this error at the machine

Re: I’m getting a unexpected word error in G code

seth.madore — Sun, 13 Nov 2022 15:59:46 GMT

Which post processor are you using? It looks like it's failing on a drill cycle, is that correct?

Re: I’m getting a unexpected word error in G code

thedoncutta — Sun, 13 Nov 2022 16:02:44 GMT

Not sure!!! This is the processor someone found for me but it’s not the correct one I guess…

Re: I’m getting a unexpected word error in G code

seth.madore — Sun, 13 Nov 2022 22:07:50 GMT

Can you share the file that has the toolpaths that are creating this error? Do you know what your machine needs to see for drilling cycles? (do you have a programming manual for your machine)

Re: I’m getting a unexpected word error in G code

a.laasW8M6T — Mon, 14 Nov 2022 04:02:30 GMT

Hi Seth

Its actually the smoothing mode, excerpt from planet cnc manual:

G64 - Blend Enable Usage: G64 <P> <Q> - P (optional) = tolerance In blend mode sharp corners will be rounded and the machine may never reach the programmed point before a direction change. Optional tolerance can be set. Parameters: #<_blendmode> - (R) current blend mode #<_blend_tol> - (R) current blend tolerance

Not sure why the machine doesnt like the Q value but i dont think its needed

This can be changed in the NC Program dialog:

Change it from G64 with PQ, to G64 with P

Re: I’m getting a unexpected word error in G code

thedoncutta — Tue, 15 Nov 2022 23:13:28 GMT

Thanks I will try this

Re: I’m getting a unexpected word error in G code

thedoncutta — Tue, 15 Nov 2022 23:13:42 GMT

Thanks I will try this.