topic Re: CAM no longer functions after the update. in Fusion Manufacture Forum

CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 08:43:10 GMT

CAM no longer functions after the update. Toolpaths are not being processed, yet no error message is displayed. In the image, the top part shows how they looked before the update, and the bottom part shows how they appear after the update. I would like to revert to the version before the update. Reinstalling it has not made any difference.

Re: CAM no longer functions after the update.

g-andresen — Tue, 17 Oct 2023 08:53:20 GMT

Hi,

I think your question actually belongs in the Manufacture Forum
Maybe @seth.madore can also answer here?

günther

Re: CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 09:19:38 GMT

Is not about the menu feature at all, it just stopped working correctly after the update.

Re: CAM no longer functions after the update.

seth.madore — Tue, 17 Oct 2023 10:06:03 GMT

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

And no, reverting to an older version of Fusion is not possible.

Re: CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 10:43:17 GMT

file attached

Re: CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 10:47:33 GMT

File attached, hope it worked this time.

Re: CAM no longer functions after the update.

seth.madore — Tue, 17 Oct 2023 11:30:11 GMT

The issue is that in your Setup, you have your Model selection and your Stock selection set to the same bodies. The Stock should be changed to either:

Relative Size Stock with no extra material

A different solid model that doesn't have the cutouts.

Result of choosing the former option:

Betreff: CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 11:45:28 GMT

Okay, thank you very much. It did work before the update. For me, it's just a workaround that gets the job done. But, it's still a bug in my view because no explanation is provided. Thank you very much for looking into it.

Re: CAM no longer functions after the update.

seth.madore — Tue, 17 Oct 2023 11:56:35 GMT

No, it's not a workaround, the way you were setting up your job was incorrect. According to the toolpath kernel, there is no material there. That it worked before was the actual bug.

Re: CAM no longer functions after the update.

johann.pascher — Tue, 17 Oct 2023 12:03:27 GMT

OK thanks. From what I understand now, my previous result was based on a bug that has been fixed.

Re: CAM no longer functions after the update.

seth.madore — Tue, 17 Oct 2023 12:03:56 GMT

correct