topic Re: Turning Profile in Fusion Manufacture Forum

Turning Profile

emre_sahin9PU3F — Tue, 13 Feb 2024 11:31:53 GMT

Hello, Mastercam has automatic creation of the turning profile of the part. Is there a method like this in Fusion? When I remove a curve from the profile in Fusion, the correct turning profile is not created.

There is a video on how to do it in Mastercam program in the link below.

https://www.youtube.com/watch?v=4M1w9tETQVc

Re: Turning Profile

seth.madore — Tue, 13 Feb 2024 11:53:27 GMT

No, that is not possible at this time. We're aware of the customer desire for this and are actively working on a solution.

Is there a specific part you're having issues with and would you be able/willing to share that file here?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply. If you can't share your file publicly, you are more than welcome to drop me a DM with a link to the file as well.

Re: Turning Profile

emre_sahin9PU3F — Tue, 13 Feb 2024 12:14:40 GMT

Hello,
I shared the file. I tried to create the turning profile, but it didn't turn out the way I wanted.

Re: Turning Profile

seth.madore — Tue, 13 Feb 2024 12:59:56 GMT

No, I can see why it did not turn out properly. What is your end goal with this sketch of the spun profile? (I'm wondering if there is a workaround I can point you towards, but it's helpful to know what you plan on doing with this data)

Re: Turning Profile

emre_sahin9PU3F — Tue, 13 Feb 2024 13:16:29 GMT

Imagine this lathe part is made of casting. The piece arrives 1mm larger than its overall dimensions. I want to program this track in Fusion. I want to make casting stock while creating stock. After creating the turning profile, I can create this stock by offset the profile.

Imagine a machine part malfunctions. The customer sent the 3D model of the part. But I need to revise the piece. For this, I need to remove the turning profile and make revisions. When creating lathe stock, my billet is the model the customer sent. The part I will program is the revised piece. The tool path will remove material according to the stock. Now, if I cannot create the turning profile of this part, I cannot make the revision, right?

When such requests come, the solution in Fusion should be simple and practical. Other CAM programs have such simple solutions. Why is it too late for such features or do program developers not know about them?

Re: Turning Profile

seth.madore — Tue, 13 Feb 2024 13:21:47 GMT

Your requests and expectations/needs make sense.

It's not that it's "too late" for such features or that the developers do not know about these features. It's a matter of resources and priorities.

As I mentioned earlier in this thread; the dev teams are aware of this shortcoming and are actively working on a solution...

Re: Turning Profile

emre_sahin9PU3F — Tue, 13 Feb 2024 13:26:57 GMT

Thank you for your understanding. If there is anything you would like to learn about myself and the CAM industry, you can DM me. I would be happy to provide ideas and support in the development of the Fusion program.

Re: Turning Profile

seth.madore — Tue, 13 Feb 2024 23:32:23 GMT

Just to give you a sneak peak into what we're working on, here's the Sketch Spun Profile (in DXF form for now)

I've attached the DXF if you wish to take a look at it. Bear in mind; nothing is constrained or dimensioned, as its lost the reference to the part. When it's all in one file, all the blue that you see above would actually be pink(ish), as it would be linked geometry.

Re: Turning Profile

emre_sahin9PU3F — Wed, 14 Feb 2024 12:37:01 GMT

Great. It would be nice to create such a turning profile.

Re: Turning Profile

seth.madore — Wed, 14 Feb 2024 12:51:34 GMT

It's closer to a reality in the software than its ever been. I don't have an exact date for when our customers will be able to do this, but it's most certainly not going to be years away!

Re: Turning Profile

gettinlate — Sun, 18 May 2025 19:51:49 GMT

We're more than a year in at this point.
Any progress on this?

Re: Turning Profile

Christoph_360 — Sun, 18 May 2025 20:26:28 GMT

Hello

I don't know if I understood it correctly, are you looking for the Spun Profile created in the Sketch.

(view in My Videos)

Thanks

Christoph

Re: Turning Profile

gettinlate — Sun, 18 May 2025 21:04:48 GMT

YES! That is exactly what I was looking for.

Thank you!

Re: Turning Profile

seth.madore — Thu, 22 May 2025 17:55:43 GMT

Yep, that was released, I dunno, maybe 6 months ago or so?