topic Re: CAM Setup Error – Kinematics Conflict (Line 760) in Fusion Manufacture Forum

CAM Setup Error – Kinematics Conflict (Line 760)

nahum_garcia — Wed, 26 Mar 2025 17:49:31 GMT

Hi everyone,

I'm getting this error in Fusion 360 while working in the CAM setup:

"Error: You can only select either a machine in the CAM setup or use the properties to define your kinematics. Error at line: 760"

I'm not sure what is causing it. I have a machine selected in the setup, but I don’t know if there's a conflict with the kinematics settings or the post-processor. Any ideas on how to fix this?

Thanks!

Re: CAM Setup Error – Kinematics Conflict (Line 760)

CGBenner — Thu, 27 Mar 2025 13:48:49 GMT

@nahum_garcia

Welcome to the community. I moved your post to this forum for better visibility with the Manufacturing community. Good luck!

Re: CAM Setup Error – Kinematics Conflict (Line 760)

viacheslav.shapilov — Fri, 28 Mar 2025 10:18:17 GMT

Hello, @nahum_garcia .

What post are you using? It looks like you probably trying to define machine twice - once on Fusion side and in post properties. And post says that you should not do this. If you define machine using post properties, don't attach machine to the setup, or use it in NC program.

Re: CAM Setup Error – Kinematics Conflict (Line 760)

CGBenner — Mon, 07 Apr 2025 12:36:38 GMT

@nahum_garcia

Hello, do you still need help with this question?