https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14104250#M177475 <P>I apologize for the inconvenience here. I have created a ticket for us to address this problem</P> Fri, 24 Apr 2026 09:38:30 GMT GeorgeRoberts 2026-04-24T09:38:30Z https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14103086#M177458 <P>Since updating I can no longer minimize libraries with holders when creating a new tool? All libraries are expanded and this leads to a lot of unnecessary scrolling through hundreds of holders instead of just expanding the library I want to choose from.</P> Thu, 23 Apr 2026 16:17:12 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14103086#M177458 MarkusQ5465 2026-04-23T16:17:12Z https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14104250#M177475 <P>I apologize for the inconvenience here. I have created a ticket for us to address this problem</P> Fri, 24 Apr 2026 09:38:30 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14104250#M177475 GeorgeRoberts 2026-04-24T09:38:30Z https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14174139#M178973 <P>Still no solution to this problem, really annoying since it worked fine before the april update...</P> Mon, 22 Jun 2026 09:16:01 GMT https://forums.autodesk.com/t5/fusion-manufacture-forum/tool-library-issue-since-april-14-2026-update/m-p/14174139#M178973 MarkusQ5465 2026-06-22T09:16:01Z