topic Re: Programming for wirecut (Wire-EDM) machines in Fusion Manufacture Forum

Programming for wirecut (Wire-EDM) machines

pramodQ4FRF — Thu, 09 Dec 2021 08:14:24 GMT

Is programming for wirecut (Wire-EDM) machines possible from fusion 360?

Re: Programming for wirecut (Wire-EDM) machines

seth.madore — Thu, 09 Dec 2021 09:33:07 GMT

Not natively, no. There are some users who have opted to use 2D Contour, define an endmill the same size as the wire, and hack a post processor to give them decent code. Note, that this does not allow for 4 axis motion, it will just be 2D. We get requests for wire EDM quite frequently, but as of yet, we haven't added native functionality into Fusion.

Re: Programming for wirecut (Wire-EDM) machines

MattWynn — Thu, 09 Dec 2021 15:24:33 GMT

2D Profile has been used for years to create toolpath for 2D edm. 2D Profile (usually for Plasma, laser, waterjet) is similar to 2D Contour, but without settings used for milling tools.

I've heard that swarf operation might work for 4 axis edm, but that would requite quite a bit of hacking and I don't think has been done.

Re: Programming for wirecut (Wire-EDM) machines

pramodQ4FRF — Wed, 15 Dec 2021 08:52:58 GMT

There should be proper workspace for "Wire-EDM programming".

Re: Programming for wirecut (Wire-EDM) machines

seth.madore — Wed, 15 Dec 2021 11:16:16 GMT

But....there isn't, and I don't believe there are any current plans to add one.

Re: Programming for wirecut (Wire-EDM) machines

johnswetz1982 — Wed, 15 Dec 2021 14:28:41 GMT

Also, though I cant find it now but I did see it in the past. Autodesk did have a EDM specific software along the lines of Power Mill, something like Power EDM, etc. I know they have an electrode module for Power Mill but not sure about wire. I am not sure they would be selling to undercut one of their own products.

Re: Programming for wirecut (Wire-EDM) machines

pramodQ4FRF — Tue, 04 Jan 2022 09:48:15 GMT

If wire EDM workspace is added Fusion 360 can be used as single product which can provide end to end solution for die mold industry.

Re: Programming for wirecut (Wire-EDM) machines

MattWynn — Tue, 04 Jan 2022 15:18:48 GMT

@pramodQ4FRF Why do you say 'EDM workspace'?
IF we were to add support for EDM, it would start with a new operation in the manufacture workspace.

What is needed beyond a new operation?

Re: Programming for wirecut (Wire-EDM) machines

Mattxer — Mon, 10 Jan 2022 17:08:43 GMT

I don't see a need for a whole workspace. Something similar to how waterjet/plasma is with a 2D and Swarf-like contour toolpaths. Params for Nozzle heights and wire diameter, a few manual nc's for tank and flushing codes and that pretty much covers it lol. I really wish there was a way to create custom toolpaths via the API but it does not appear to be possible unfortunately.

Re: Programming for wirecut (Wire-EDM) machines

eloymBGBQP — Fri, 20 Oct 2023 17:02:03 GMT

Any updates on Autodesk products that support wirecut EDM with 4th axis on Fanuc machines in 2023?

Re: Programming for wirecut (Wire-EDM) machines

HughesTooling — Fri, 20 Oct 2023 17:12:14 GMT

@eloymBGBQP Autodesk's FeatureCAM does wire erosion.

https://help.autodesk.com/view/FCAM/2024/ENU/?guid=GUID-6F18C0BC-15DB-4F34-AC0A-179E7E289EBE

Mark

Re: Programming for wirecut (Wire-EDM) machines

fernanda_medina_aguirre — Fri, 19 Jul 2024 14:11:10 GMT

Share Wire EDM Feedback
I'm Fernanda, a Manufacturing specialist focused on the implementation of manufacturing solutions. At Autodesk we are always looking for ways to make our customers’ experience great.
We would love to hear your thoughts about Wire EDM. Please respond to the following survey, which will help us to understand your current manufacturing needs. The survey should take 5 mins or less to complete.
Wire EDM survey link
We really appreciate your time. Your feedback helps make Autodesk even better.

Re: Programming for wirecut (Wire-EDM) machines

rockyN2JHF — Thu, 17 Jul 2025 18:13:52 GMT

Here it is; a year after the last post, and still no support for Wire EDM in Fusion. Yet, Autodesk stripped FeatureCAM down as spare parts, and FeatureCAM had unmatched wire EDM capabilities 20 years ago. Now, of course, FeatureCAM is unusable, due to being cloud-based as well; that may be the saddest part.

Re: Programming for wirecut (Wire-EDM) machines

Machiningsokiguess — Wed, 01 Oct 2025 20:07:03 GMT

We would really like this! How can we get this going again? We want multi axis functionality but if its only 2 axis to start. That would help a lot.

Re: Programming for wirecut (Wire-EDM) machines

a.laasW8M6T — Thu, 02 Oct 2025 07:16:29 GMT

Prosolids just released their Addin for Fusion for Wire EDM

https://www.prosolids.com/

Re: Programming for wirecut (Wire-EDM) machines

emil_gerasimov — Thu, 02 Oct 2025 13:40:43 GMT

There is a WEDMPugin for Fusion: Pro solids Wire EDM which adds WEDM tabs in manufacture workspace.

Re: Programming for wirecut (Wire-EDM) machines

emil_gerasimov — Thu, 02 Oct 2025 13:43:54 GMT

Can this problem to be caused from the update of 27 september, where project hub supports new roles and permissions?

My acount has administrator level, but eveyone else in the hub have the same problem.

Re: Programming for wirecut (Wire-EDM) machines

Machiningsokiguess — Thu, 02 Oct 2025 20:34:14 GMT

I saw Prosolids but the price was a bit much at $2k per year. At that price why not go with esprit?