topic Tool display incorrect in Fusion Manufacture Forum

Tool display incorrect

HughesTooling — Tue, 23 Jun 2015 11:09:47 GMT

Tools with a stepped shanks do not display correctly. If I open a file from before the last update the tools are correct. If you select the same tool in the file or from a library there's a disk added at the change of diameter.

Old file with toolpath.

New toolpath selecting the same cutter from the current document.

Sample file attached.

Thanks Mark.

Re: Tool display incorrect

al.whatmough — Tue, 23 Jun 2015 15:42:18 GMT

I have been able to confrim the issue and have submitted a ticket.

Re: Tool display incorrect

jeff.walters — Tue, 23 Jun 2015 17:41:23 GMT

I have reported this to the developers on ticket CAM-2085

Re: Tool display incorrect

HughesTooling — Wed, 24 Jun 2015 12:48:42 GMT

Another one that's no working is centre drills.

Tool from before update stored in a file, and what the new tool library shows.

In the new library the taper angle is 5° for some reason.

Mark.

Re: Tool display incorrect

jeff.walters — Wed, 24 Jun 2015 15:07:25 GMT

This has been reported on ticket CAM-2092. Sorry to say the only solution for now is to change the 5° to 60° manually