topic Re: CNC 101 in Fusion Manufacture Forum

CNC 101

al.whatmough — Fri, 11 Dec 2015 20:48:00 GMT

Below is a 30 minute video explaining the basics of CNC machining:

Take your education a step further and dive into the "CNC Handbook"

http://cam.autodesk.com/docs/cncbook/en/

What resource do you use to learn CNC?

Running a Haas? Check out the set of training video Dan did at Pier 9!

Re: CNC 101

TMC.Engineering — Wed, 11 Nov 2015 21:07:07 GMT

I really like the CNC Book can that be added to Fusion under the cam area? or maybe to the Help section?

Re: CNC 101

al.whatmough — Fri, 11 Dec 2015 20:48:36 GMT

Added videos from Pier 9. I hope they are a help!

Re: CNC 101

scottmoyse — Fri, 08 Jan 2016 21:01:41 GMT

I just watched the full series of videos... is there something in the air in Pier 9? They're all insane

Re: CNC 101

daniel_lyall — Sat, 09 Jan 2016 08:29:58 GMT

they need a pier9 in NZ

Re: CNC 101

Anonymous — Thu, 27 Oct 2016 22:36:41 GMT

Hello

How do I stop the machine from doing a automatic tool change without have to edit the G-code. I Don't have a automatic tool change.it is doing it right at the beginning why does it do it.

I have not instructed it to do it

thanks

Re: CNC 101

scottmoyse — Thu, 27 Oct 2016 22:39:11 GMT

Can you start a new thread & provide details about your machine and which post you are using? You might want to consider getting some training & engaging with a reseller to get your post sorted for your machine. Otherwise you can get it sorted here with the help of the community, but you definitely need to start your own thread and provide more detail.

Re: CNC 101

Anonymous — Thu, 27 Oct 2016 22:53:13 GMT

I have got a stepcraft 600 Machine UCCNC post I DON,T have a automatic Tool changer didn't you understand what i an saying

Re: CNC 101

scottmoyse — Thu, 27 Oct 2016 23:00:00 GMT

@Anonymous wrote:

I have got a stepcraft 600 Machine UCCNC post I DON,T have a automatic Tool changer didn't you understand what i an saying

Yeah I understood what you were saying. Do you want some help? Please start your own thread, with all the details provided. Machine, Controller and which post you have been using. There are several answers to your question and you haven't provided enough detail. Plus this thread is about CNC 101.... not post customisation or about how to use the Fusion 360 tool definition.

Re: CNC 101

brianrepp — Thu, 17 Nov 2016 20:50:30 GMT

All - we have locked this thread. To help make sure we can help address your individual question or issue, please create a new thread with enough detail so that we can chime in.