topic Re: Is this a turning profile bug? in Fusion Manufacture Forum

Is this a turning profile bug?

dca911t — Wed, 09 Dec 2015 02:00:33 GMT

So I wanted to turn this part on the lathe.

I wonder if this is a bug because if the yellow plane (X axis) is
not intersecting the profile, it will not generate a valid tool path.
I suppressed some of the features to get back to where the yellow
plane (X axis) IS intersecting the profile and it generates the tool path.

I would think you should be able to select the faces of the profile
and still generate a tool path even if the yellow plane (X axis) is
not intersecting the profile.

David

Re: Is this a turning profile bug?

Steinwerks — Wed, 09 Dec 2015 03:08:54 GMT

Turn on Spun Profile (I believe its's in the Setup).

Re: Is this a turning profile bug?

dca911t — Wed, 09 Dec 2015 03:56:12 GMT

@atomkinder67 wrote:
Turn on Spun Profile (I believe its's in the Setup).

atomkinder67

Thank you very much, that fixed it!

Do you know what "Spin Profile" is actually doing?

Thank You

David

Tormach Series3 1100

MagnaTurn 612

Re: Is this a turning profile bug?

Steinwerks — Wed, 09 Dec 2015 04:04:14 GMT

@Anonymous wrote:
@atomkinder67 wrote:
Turn on Spun Profile (I believe its's in the Setup).
atomkinder67

Thank you very much, that fixed it!

Do you know what "Spin Profile" is actually doing?

Thank You

David
Tormach Series3 1100
MagnaTurn 612

I believe it looks at the outermost profile around the entire model along the specified (X) axis and rotates it around the Z axis.

Also please mark my answer as a solution so others can see the issue has been resolved (if it has, that is).

Re: Is this a turning profile bug?

dca911t — Wed, 09 Dec 2015 18:05:02 GMT

So to me it is Abby Normal to have to select "Spin Profile" in "setup", when you are working in a "Turning Profile".

You should be able to just select a face and generate tool paths based on the face selected.

Is "Spin Profile" good workaround? Yes, But is it the best solution??

Thank you atomkinder67, for your prompt, answer, it allowed me to move forward!

David

Tormach Series3 1100

MagnaTurn 612

Re: Is this a turning profile bug?

Steinwerks — Wed, 09 Dec 2015 18:08:52 GMT

Well this is how HSM does it, at least for now. Keep in mind that it retains its 3-axis system in turning as well, so mill-turn is an option and if one has 4th axis capability you could run this with an end mill even in a turning center if it has live tooling. Spun Profile makes a "turnable" cylindrical profile even with "broken" geometry.

And yes, other CAM systems do this differently, but it is what it is.