topic Finishing Path incorrect in Fusion Manufacture Forum

Finishing Path incorrect

M-Russmann — Thu, 15 Dec 2016 11:43:17 GMT

Hello,

actually I am giving Fusion 360 a testrun in our Company, might be switching from Inventor and Mastercam to Fusion 360.

While playing around with some features in CAM Module i cannot get my finishing path for this simple file to work.

While rouging and face works perfect, finishing with my DCGT Geometry will result in a toolpath like shown below.

Any idea whats my mistake?

Betreff: Finishing Path incorrect

M-Russmann — Thu, 15 Dec 2016 14:43:38 GMT

Meanwhile I have figured out the problem. The angle of my tool was the same as the conture causing Fusion to injure my part.

I just forgot to change my holder angle from standard 5 degrees to 3 degrees when creating the tool. I did calculate it in my head that this geometry will work for this part but did not check the holder Fusion created for this.

Now I have 2 degrees space for the tool to cut and everything is running as it should be.